The AirTAC GFR20006MJF3TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJF3TK is a size-200 GFR filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in a single compact body. This configuration is a 1/8 in NPT port unit with a manual drain bowl in PC (polycarbonate), a standard 40 um filter element, a set pressure range of 0.05-0.9 MPa (7-130 psi), an embedded square gauge scaled in bar, and a reverse/check valve fitted. No mounting bracket is included, so plan for direct line or panel mounting as installed.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of drain type, 40 um or 5 um (W) filtration, gauge scale, thread (PT standard, G and NPT as options) and bracket. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR20006MJF3TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding clamping cylinders on a small press line: filtered, regulated air at a set pressure keeps clamp force consistent between cycles, with the check valve holding the downstream side if upstream supply dips.
Supplying diverters, pushers and seal cylinders on a packaging conveyor: the 40 um element stops debris reaching valves, and the manual drain lets an operator clear accumulated water at shift start.
Point-of-use preparation for grippers and end-effectors in a compact robotic cell, where the 1/8 in port and small size-200 body fit tight manifolds and the bar-scale gauge gives a local setpoint readout.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range, so step up to GFR300/400/600 if your line may need more flow later. Drain choice matters: manual drain (this unit) needs someone to open the bowl, while automatic or differential-pressure drain suits unattended installations. Filtration is 40 um standard; specify the W code for 5 um where finer protection is needed. The embedded square gauge here reads in bar; MPa and psi scales are available, and an external round gauge is an option. Thread is NPT on this unit; PT is the standard and G is also an order option. A J code deletes the bracket, as on this model. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure, set pressure and expected air demand, and we will confirm the sizing from the datasheet curves on request before you order.
The M in the code specifies a manual drain bowl: an operator opens it to release collected water, which suits attended cells and low-condensate duty. For unattended installations, GFR units can be ordered with an automatic (A) or differential-pressure (default, blank) drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.