The AirTAC GFR20006MLJC2WTK AirTAC Filter Regulator NPT1/8 5um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MLJC2WTK is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit has a 1/8 in NPT port, a 5 um filter element (code W), a manual drain, the low-pressure regulator type, a round pressure gauge with a psi scale, and a built-in reverse/check valve; no mounting bracket is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowl on this 200-size unit is polycarbonate (PC).
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with 1/8 in to 1 in ports, a choice of PT, G or NPT threads, differential-pressure, automatic or manual drains, 40 um standard or 5 um elements, and a range of gauge options. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm datasheet figures and sizing for your application before ordering.
| Model | GFR20006MLJC2WTK AirTAC Filter Regulator NPT1/8 5um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtered 5 um air and low-pressure regulation in one body feed the clamp actuators; the psi-scaled round gauge lets the setter read the setpoint directly, and the check valve holds the circuit against backflow.
Mounted at the drop feeding conveyor diverters and stop cylinders, the manual-drain bowl is bled during shift checks, the 5 um element protects the cylinders, and the regulator sets the pressure the actuators need.
On a bench running low-pressure air tests, the low-pressure regulator type, 5 um filtration and a psi gauge give a clean, readable supply to the instrument under test, with the check valve preventing reverse flow into the supply.
The real choices on this family: step through the 200/300/400/600 sizes and their 1/8 in to 1 in ports to match the flow your line needs; pick the drain - differential-pressure (the default), automatic, or manual as fitted here, which is bled by hand during routine checks; choose the 40 um standard element or the 5 um W grade fitted on this unit for finer protection; set the gauge scale to MPa, psi or bar; and order PT, G or NPT thread. Brackets are optional on GFR. Because AirTAC publishes flow as curves rather than one rated number, send us your application details and we will confirm sizing and the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the flow your application needs, and we will confirm sizing and the datasheet figures on request before you order.
The M code fits a manual drain: the bowl is drained by hand during routine checks. The GFR family also offers a differential-pressure drain (the default) and an automatic drain (code A) if you would rather not rely on manual draining. The element on this unit is the 5 um W grade; the 40 um standard grade is the other option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.