The AirTAC GFR20006MLJF2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006MLJF2WGK is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation in a single body. This configuration has a G1/8 (1/8 in) port, a manual drain on the polycarbonate bowl, a 5 um filter element, a low-pressure regulator type and an embedded square gauge scaled in psi. A reverse/check valve is fitted and no mounting bracket is supplied. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200 to 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) filtration, gauge scale options and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR20006MLJF2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtered, regulated air to spray guns running at low set pressures. The 5 um element keeps paint-line valves clean and the manual drain supports an end-of-shift bowl purge.
Clean, regulated low-pressure air for pneumatic clamps on a machining fixture. The fitted reverse/check valve helps hold the circuit and the square psi gauge gives a direct setpoint reading.
Low set-pressure air for heat-seal and wrapper cylinders on a packaging line. The manual-drain PC bowl is purged during changeover and the 5 um element protects the machine's control valves.
Size and port set the flow path: this 200-size unit with a G1/8 port suits compact circuits, and you step up to 300, 400 or 600 as your demand grows. The manual drain means an operator opens the bowl drain periodically; choose automatic or differential-pressure drain if that routine does not fit your line. The 5 um element (code W) is finer than the 40 um standard. The gauge here is the embedded square type on a psi scale; MPa or bar scales and an external round gauge are options. Thread is G; PT is the standard and NPT is an order option. No bracket is included (code J). This is the low-pressure (L) regulator type, so confirm the setpoint window with us for your duty. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated figure, so there is no one number we can honestly quote. Send us your line pressure and air demand and we will confirm the sizing from the datasheet before you order.
The M in the code selects a manual drain: an operator opens the bowl drain to purge collected water. If that routine does not suit your installation, the GFR family is also available with automatic (A) or differential-pressure (blank) drains, and this unit's 5 um element can be swapped for the 40 um standard by choosing the code without W.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.