The AirTAC GFR20006T AirTAC Filter Regulator 1/8 in NPT, 5 um, psi is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJF2WTK is a size-200 filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This configuration carries a 1/8 in NPT port, a 5 um filter element (finer than the 40 um standard), a manual drain you operate by hand to empty collected condensate, an embedded square gauge reading in psi, and a built-in reverse/check valve that holds downstream pressure when the upstream supply drops. The polycarbonate bowl lets you see the condensate level, and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family runs from size 200 up to size 600, with port sizes from 1/8 in to 1 in, PT as the standard thread and G or NPT as order options, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, and gauge scale choices. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR20006T AirTAC Filter Regulator 1/8 in NPT, 5 um, psi |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Clean, regulated air at the machine tool keeps spindle seals, tool-clamp cylinders and chip-clearing jets behaving consistently shift after shift; the 5 um element and psi gauge suit a cell where operators read US units.
On a carton-forming or case-packing line, filtered and regulated air feeds clamp cylinders and vacuum generators; the check valve holds the circuit during brief upstream dips so a partially closed clamp does not release mid-cycle.
Benchtop analysers and test rigs need air with fine particulate removed and pressure held steady; the 5 um element, manual drain for controlled daily servicing and psi gauge fit a lab bench supplied at 1/8 in.
Size 200 with a 1/8 in NPT port is the entry step of the GFR range; step up through sizes 300, 400 and 600 when your line needs larger ports and more flow. The 5 um element in this code suits air that feeds sensitive components; the 40 um standard element is the usual choice for general shop air. The manual drain means an operator opens the drain periodically, which suits points that are checked during routine rounds; automatic or differential-pressure drains suit unattended installations. The square gauge is fitted here reading in psi; MPa or bar scales and an external round gauge are alternatives. NPT threading is the order option in this code; PT is the catalogue standard and G (BSPP) is also available. A bracket can be added if you want panel or wall fixing.
Flow for this family is published as curves, not a single rated figure, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated number, so we do not quote a figure here. Tell us your required flow and working pressure and we will confirm the correct size against the datasheet on request before you order.
The M in the code means the drain is operated by hand: an operator opens it to empty collected water, which suits installations checked on a routine round. If the unit sits where nobody passes regularly, order the A (automatic) version or leave the drain code blank for the differential-pressure default instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.