The AirTAC GFR20008MLF1WTK AirTAC Filter Regulator NPT1/4 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20008MLF1WTK is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration is built for low-pressure circuits, with a 1/4 in NPT port, a 5 um filter element (code W), a manual drain on the polycarbonate bowl, an embedded square gauge reading in MPa, and a reverse (check) valve fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. A mounting bracket is included.
This is a genuine AirTAC part. The GFR family is published in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, and each size can be ordered with a different drain type, a 40 um or 5 um element, square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR20008MLF1WTK AirTAC Filter Regulator NPT1/4 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Filtering and regulating air to low-pressure clamping circuits on a machining centre, where the 5 um element protects the clamp cylinders and the fitted check valve blocks reverse flow in the circuit.
Feeding regulated air to the valve stack on a carton-sealing or bagging machine, with the manual drain opened at the bottom of the bowl whenever collected water needs clearing.
Supplying low-pressure air to a lab automation skid or pilot rig, where the MPa-scale square gauge gives a local setpoint readout and the compact 200-size body fits tight panels on the included bracket.
The decodable choices on this unit are: size and port (200 series here, 1/4 in NPT) stepped against the flow your line needs; drain type (manual here, with automatic and differential-pressure available on other codes); filter grade (5 um here, 40 um standard elsewhere); gauge scale (MPa square gauge here, psi and bar scales available); thread (NPT here, PT standard and G optional); and bracket (included). The honest limit: AirTAC publishes flow as curves, not a single rated figure, so send us your flow and pressure requirements and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as performance curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm from the datasheet whether the GFR200 at 1/4 in NPT suits your application.
This code carries M, so the polycarbonate bowl is drained by hand whenever water collects. If you prefer the bowl to discharge automatically or on differential pressure, we can quote the equivalent GFR200 code with an A drain or the default differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.