The AirTAC GFR200C06C1TK AirTAC Filter Regulator NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06C1TK is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in one body. This configuration has a 1/8 in NPT port, a 40 um filter element, a differential-pressure drain, and a round pressure gauge with MPa scale fitted. A reverse (check) valve is included in the code and a mounting bracket is supplied. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the polycarbonate bowl handles a maximum inlet pressure of 1.0 MPa (145 psi) at temperatures from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include automatic or manual drains, a 5 um filter element (code W), square or round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads, and low-pressure or check-valve variants. Flow is published as curves rather than a single rated figure, so ask us to confirm datasheet figures for your application.
| Model | GFR200C06C1TK AirTAC Filter Regulator NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air feeding the sealing cylinder and clamp valves on a carton-closing station, with the round gauge giving operators a local set-pressure readout.
Point-of-use air prep for a pick-and-place robot cell, conditioning the 1/8 in drop that supplies the gripper and stopper valves.
Regulated air for conveyor stop and pusher cylinders on a bottling line, where the differential-pressure drain handles line condensate and the gauge shows the set pressure.
Choose the size and port to match the air demand of the machine: this unit is size 200 with a 1/8 in NPT port, the smallest step in a range that runs 200/300/400/600 up to 1 in. Drain type is a real choice: differential-pressure (as here, the default), automatic (code A) or manual (code M). Filter grade is 40 um standard; specify the W variant for 5 um. Gauges can be square (embedded) or round (external) with MPa, psi or bar scales - this code carries a round MPa gauge. Thread is PT as the AirTAC standard, with G (BSPP) and NPT as order options; this unit is NPT. A bracket is included, and code J deletes it. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and datasheet figures for this exact model on request.
This model carries the standard 40 um element. The GFR family also offers a 5 um element under code W, so order the W variant if your application needs finer filtration. Regulation on this unit is the standard type, adjustable 0.15-0.9 MPa (20-130 psi) with the differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.