The AirTAC GFR200C06LJF2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJF2WGK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is built for low-pressure circuits, with a fine 5 um filtration element (code W), a metal bowl on differential-pressure drain, a reverse (check) valve fitted, and an embedded square gauge reading in psi. The port is G1/8 (1/8 in), maximum inlet pressure is 1.0 MPa (145 psi), and the unit operates from -5 to 70 C in non-freezing conditions. It is supplied without a mounting bracket.
This is a genuine AirTAC part from the GFR filter-regulator family, which spans sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard; G and NPT as order options), drain types, filter grades, gauge scales and bracket options. Flow is published as curves rather than a single rating, so ask us to confirm sizing or any datasheet figure for your application before ordering.
| Model | GFR200C06LJF2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds and regulates air to clamp cylinders on a fixture that must hold at a low, stable setting, with the 5 um element keeping scale and pipe debris out of the clamp valve.
Sits at the drop of a packaging machine's air line, filtering condensed water from the main supply and holding a reduced pressure for gentle carton-forming and sealing cylinders.
Provides filtered, low-pressure air to a bench rig or pilot-scale rig, where the psi square gauge gives a direct readout and the check valve holds the setting if supply dips.
Choose the size and port step against the air consumption of the circuit: this unit is size 200 with a G1/8 (1/8 in) port, the smallest step in the GFR range, with larger sizes available for higher demand. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering. Other decodable choices: drain type (differential-pressure as here, automatic, or manual), filter grade (40 um standard or 5 um with code W, fitted here), gauge type and scale (embedded square gauge standard, external round gauge optional, MPa/psi/bar scales - this unit is square, psi), thread (PT standard; G or NPT to order), bracket or no bracket (this unit has none), and the low-pressure regulator type for circuits that run below standard ranges. Its exact regulation range is not published; we will confirm it on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and we will confirm the flow and sizing from the datasheet on request before you order.
The W in the code selects the optional 5 um filtration grade; the GFR standard element is 40 um. The finer 5 um element suits downstream components that need cleaner air, while the 40 um grade remains the usual choice for general supply. Both grades are available across the GFR range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.