The AirTAC GFR200C06MC1WT AirTAC Filter Regulator NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MC1WT is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 configuration is threaded NPT 1/8 in, carries the finer 5 um filter element, a manual drain on the metal bowl, a round pressure gauge reading in MPa, and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options across the series include automatic, manual or differential-pressure drains, 40 um or 5 um elements, embedded square or external round gauges with MPa, psi or bar scales, G (BSPP) and NPT thread variants, and a reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR200C06MC1WT AirTAC Filter Regulator NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use air preparation for a robotic pick-and-place cell: the unit filters supply air down to 5 um ahead of the gripper's directional valves and lets the technician set and read line pressure on the round gauge at the cell.
Conditioning the compressed air feeding benchtop analytical instruments, where the finer 5 um element and a stable, manually adjusted setpoint protect sensitive pneumatic functions inside the instrument.
A filter regulator mounted directly ahead of the cylinder and valve stack on a packaging machine, with the manual drain bled by the operator as part of the shift-start routine.
Step the size and port against the air your application consumes: sizes 200, 300, 400 and 600 rise in port and flow capacity, and this unit sits at the small end with a 1/8 in NPT port. Choose the filter grade by what the downstream equipment tolerates: 40 um is the standard element for general supply, while the 5 um element fitted here is the finer catalogue option. Drain type is a real choice on this series: manual (fitted here) means condensate is bled from the bowl by hand, while automatic and differential-pressure drains discharge condensate without attention. Gauges can be the embedded square type or an external round gauge, with MPa, psi or bar scales - this unit carries a round MPa gauge. PT is the standard thread and G (BSPP) or NPT are order options; this unit is ordered in NPT. A mounting bracket is included. Flow for the GFR series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the flow and datasheet figures for this exact configuration on request.
A manual drain means condensate collected in the bowl is released by hand, which suits machines that are tended regularly. If the unit will be mounted where it cannot easily be reached, the same series is available with an automatic or differential-pressure drain. Note that the manual-drain version also carries the wider regulator adjustment range of 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.