The AirTAC GFR200C06MJNT AirTAC Filter Regulator, NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines two air-treatment jobs in one body: a filter that removes water and particulate from compressed air, and a pressure regulator that sets a stable downstream pressure. This unit is the 200 size with a 1/8 in NPT port, a 40 um filter element, and a manual drain you operate by hand to empty collected condensate from the bowl. The regulator is the standard type with a setting range of 0.05-0.9 MPa (7-130 psi); maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). This configuration is specified without a pressure gauge and without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and is offered with a choice of drain (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um with code W), gauge options, and thread (PT as the standard, with G and NPT as order options). Flow for this series is published as curves rather than a single rated figure, so ask us to confirm sizing and any datasheet figure against your application before ordering.
| Model | GFR200C06MJNT AirTAC Filter Regulator, NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Fit at the air drop to a cartoning or wrapping machine: the filter stage strips water and pipe scale before they reach valves and cylinders, while the regulator holds the actuator pressure the machine was set up with.
On a machining-cell clamping fixture, the regulator lets the setter dial in clamping force by pressure, and the 40 um element keeps grit out of the cylinder seals.
At a maintenance-shop drop feeding impact wrenches and air ratchets, the unit cleans the supply and lets each station run its own set pressure independent of the compressor header.
Start from the air demand of your line and step through the sizes: 200 is the smallest GFR frame, here with a 1/8 in NPT port, while the 300, 400 and 600 sizes carry larger ports and more flow. Choose the drain to match your maintenance routine: manual (this unit) is emptied by hand, automatic drains on its own, and the default differential-pressure drain uses the pressure drop across the element. The 40 um element is standard; specify 5 um (code W) where finer filtration is needed. Gauge type and scale (MPa, psi or bar), PT, G or NPT thread, and a mounting bracket are all ordering choices. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so there is no one number we can quote honestly. Tell us your air demand and working pressure and we will confirm from the datasheet curve whether the 200 size with a 1/8 in port suits, or whether you should step up to a 300 or 400.
No. The N in GFR200C06MJNT means no gauge is fitted; you would read the downstream pressure on your own gauge or order a gauge version of the GFR range instead. Gauges are offered as an embedded square type or an optional external round type, with MPa, psi or bar scales - ask us to identify the right code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.