The AirTAC GFR200C06MLC2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLC2WGK is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This 200-size unit is built around a G1/8 (BSPP) port with a 5 um filter element for finer air cleaning than the 40 um standard, a manual drain for controlled bowl purging, and a low-pressure regulator type for circuits that run below standard regulator ranges. It ships from the factory with an external round pressure gauge scaled in psi, a reverse/check valve fitted, and a mounting bracket included.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um filtration, gauge styles and scales, and PT, G or NPT threads. We confirm flow and other datasheet figures on request, since flow is published as curves rather than a single rating.
| Model | GFR200C06MLC2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, pressure-controlled air to vacuum generators and small cylinders on a packaging line's pick-and-place station, with the 5 um element protecting tight-tolerance pneumatic components from particulate carryover.
Supplies clean, regulated low-pressure air to analytical instruments and sample-handling actuators in a lab, where the 5 um grade and a psi-scaled gauge support stable, readable supply conditions.
Regulates supply pressure to low-pressure clamping cylinders on a machining-centre fixture, with the reverse/check valve holding the set circuit against supply-side interruptions and the manual drain allowing scheduled bowl purging.
Size and port step up together in the GFR series: 200 with 1/8 to 1/2 inch ports, 300 and 400 with larger ports, and 600 for the highest flows, so match the size to the air demand of the circuit. This unit is already specified with the choices that matter for finer duty: 5 um filtration instead of the 40 um standard, a manual drain where an operator can purge the bowl on a schedule, a psi-scaled round gauge for US-style readouts, G (BSPP) thread, a reverse/check valve, and a mounting bracket. If you need automatic or differential-pressure draining, a different gauge scale, NPT thread, or no bracket, those are decodable options in the same series. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the flow and sizing from the datasheet on request before you order.
The M in the code specifies a manual drain: an operator purges accumulated water from the bowl by hand, which suits installations that are checked regularly. Automatic and differential-pressure drain versions are available in the same GFR200 series if you prefer unattended draining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.