The AirTAC GFR200C06MLC2WT AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06MLC2WT is a low-pressure filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This configuration is the 200 size with a 1/8 in NPT port, a fine 5 um filter element (code W, versus the 40 um standard), a manual drain bowl you empty by hand, a round pressure gauge reading in psi, and the low-pressure regulator type for circuits that run below standard supply pressure. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um filtration, gauge style and scale options, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200C06MLC2WT AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Fixture clamps and swing cylinders on an assembly line that run on a deliberately reduced supply pressure get filtered air and a steady set pressure from one unit, with the psi gauge giving operators a direct readout at the station.
A compact machining centre or tool-presetter drawing clean air for its tool-change and clamping circuits uses the 1/8 in port size and 5 um element to keep fine particulate out of pilot valves and small-bore actuators.
Bench-top test rigs and lab apparatus that need clean, gently regulated air - where the line will not see standard shop pressure - use the low-pressure type with manual drain for simple, supervised day-to-day operation.
Start with the size and port: the 200 series with a 1/8 in NPT port suits compact circuits, and stepping up to 300/400/600 gives larger ports and more flow - match the step to the air demand of the machine rather than the fitting alone. Because this is the low-pressure (L) type, choose it where the circuit runs below standard supply pressure; the exact regulation range for this variant is not published, so confirm it with us. The 5 um element (W) is the right pick where finer particulate matters; the 40 um standard element suits general supply air. The manual drain means an operator opens the bowl drain periodically - pick the automatic or differential-pressure drain option if nobody will be on hand to do that. Gauge style (embedded square or external round) and scale (MPa, psi or bar) are selectable, as are PT, G and NPT threads and the mounting bracket.
Flow for this family is published as curves, not a single rated figure, so we cannot quote one number here. Send us your application details and we will confirm sizing and the datasheet figures before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated figure, so we do not quote a number here. Send us your application - air demand, supply pressure and set pressure - and we will confirm the datasheet flow figures and check the sizing for you before you order.
The M in the code means the bowl drain is opened by hand: an operator drains accumulated water periodically. If the unit will be mounted where nobody drains it regularly, the same family is available with an automatic drain or the default differential-pressure drain - tell us the installation and we will confirm the right variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.