The AirTAC GFR200C06MLJC2GK AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MLJC2GK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit has a G1/8 (BSPP) port, a manual drain bowl with a 40 um filter element, the low-pressure regulator type, a round pressure gauge reading in psi, and a built-in reverse (check) valve. It is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um (W) filtration, embedded square or external round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm datasheet figures for your application.
| Model | GFR200C06MLJC2GK AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, pressure-reduced air feeds pneumatic clamps on a CNC fixture that must hold workpieces gently, with the fitted check valve in the circuit and the manual drain cleared at shift checks.
Supplies clean, regulated air to low-pressure sealing and folding cylinders on a cartoning or tray-sealing line, where the 40 um element protects downstream valves from water and debris.
Conditions shop air for laboratory pneumatic apparatus and low-pressure test benches that run below standard line pressure, giving filtered air and a local psi gauge at the rig.
Size steps from 200 to 600 as flow demand grows; this unit is size 200 with a G1/8 port, so match it to your line size using the flow curve rather than a single rating. Code M specifies a manual drain, which suits attended installations where the bowl is drained at service intervals; automatic or differential-pressure drains are the alternatives for unattended duty. The 40 um element is standard - specify W for 5 um where finer filtration is needed. This is the low-pressure (L) regulator type; its exact regulation range is not published, so confirm your set pressure with us before ordering. The fitted round gauge reads in psi; embedded square gauges and MPa or bar scales are also available. The thread here is G (BSPP); PT is the standard and NPT is an order option, and a mounting bracket can be specified if required. Because flow is published as curves, not a single rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your line size and application and we will confirm the flow and datasheet figures for this unit on request.
The M in the code specifies a manual drain: water collected in the bowl is released by hand at service intervals. If the installation runs unattended, the same GFR family is available with automatic or differential-pressure drains - ask us for that variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.