The AirTAC GFR200C08MLC3T AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08MLC3T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is the size 200 unit with a 1/4 in NPT port, a metal bowl with a manual drain, the standard 40 um filter element, and the low-pressure regulator type. A round pressure gauge scaled in bar is fitted, the mounting bracket is included, and no reverse (check) valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, PT as the standard thread and G or NPT as order options, a choice of differential-pressure, automatic or manual drains, an optional 5 um element (code W), and gauge and bracket choices. Flow for this series is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before you order.
| Model | GFR200C08MLC3T AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Air preparation for a pneumatic clamping fixture on a machining cell that holds workpieces at a reduced set pressure, with filtered air protecting the cylinder seals.
Feeding clean, regulated air to the cylinders and grippers on a packaging conveyor, where the manual drain is emptied during scheduled line checks.
Supplying regulated air to laboratory test rigs and bench automation that need a low set pressure and a bar-scale gauge that can be read directly at the bench.
Size and port step up together across the GFR range (200/300/400/600, 1/8 to 1 in), so pick the size that matches the air demand of your circuit; we can check the published flow curves against your requirement before you order. Drain type is a real choice: differential-pressure (the default), automatic, or manual as on this unit - a manual drain needs periodic opening of the drain valve. The element is 40 um as standard; code W gives 5 um for finer filtration. Gauge style and scale (MPa, psi or bar), thread (PT standard, G or NPT to order) and the bracket are also selectable. This unit is the low-pressure type; its adjustment range is not published in the figures we hold, so confirm it with us against your set point.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your air demand and line pressure and we will confirm the datasheet flow curves for this size 200, 1/4 in unit before you order.
The M in the code sets a manual drain: the bowl must be opened periodically to release collected water. Differential-pressure (the family default) and automatic drains are available in the same series if you would rather not rely on operator attention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.