The AirTAC GFR200C08MLJC2WT AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLJC2WT is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration is the 200 size with a 1/4 in NPT thread, the low-pressure regulator type (code L), a manual drain, and the optional 5 um filter element (code W) in place of the 40 um standard. It comes with an external round gauge scaled in psi, no mounting bracket, and no reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The 200-size bowl is polycarbonate and is emptied by opening the manual drain.
This is a genuine AirTAC part. The GFR family is published in 200, 300, 400 and 600 sizes covering port sizes from 1/8 in to 1 in, with choices of drain type, filter grade, gauge style and scale, thread (PT is the standard; G and NPT are order options) and bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200C08MLJC2WT AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding pneumatic clamp cylinders on a machining or assembly fixture that must hold a reduced, stable set pressure below what a standard regulator delivers, with the 5 um element keeping wear particles and condensed water out of the clamping valves.
Conditioning the atomizing and actuation air for spray guns on a paint or coating line, where the 5 um filtration helps keep water and particulates out of the finish and the low-pressure type suits guns run at reduced set pressures.
Supplying the small bore cylinders and grippers on a packaging line's sealing or pick-and-place station, combining point-of-use water and particulate removal with local pressure setting at the station rather than at the compressor room.
Start with the port step: within the GFR family the 200/300/400/600 size codes move you up through port sizes from 1/8 in to 1 in, so match the size to the air consumption of the downstream circuit rather than to the pipe alone. This unit is already fixed at 200 size, 1/4 in NPT. Next, drain type: manual drain (as here) means an operator opens the bowl drain during checks, while automatic and differential-pressure drains discharge condensate without intervention - choose manual only where a drain routine already exists. Filter grade: the standard element is 40 um; the W code fitted here gives 5 um for finer protection of downstream components. Gauge: an embedded square gauge is the standard fitment and external round gauges are optional, with MPa, psi or bar scales - this unit carries the round gauge in psi. Thread: PT is the catalogue standard and G (BSPP) or NPT are specified at order, as done here with the T code. Bracket: the J code means no bracket is included; add the bracket option if the unit will be panel- or wall-mounted rather than carried on the pipe. Note that the L code makes this the low-pressure regulator type; its exact regulation range is not published in our sheet, so confirm it with us. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one l/min or SCFM number we can honestly quote for this model. Tell us your operating pressure and the air consumption of the downstream equipment and we will confirm the sizing against the datasheet curves on request before you order.
GFR is the filter-regulator family, 200 is the size, 08 is the 1/4 in port, M is the manual drain, L is the low-pressure regulator type, J means no mounting bracket, C2 is the external round gauge with a psi scale, W is the 5 um filter element, and T specifies the NPT thread. The exact regulation range for the low-pressure type is not published in our sheet, so confirm it with us on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.