The AirTAC GFR300-10 AirTAC Filter Regulator NPT3/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300-10 is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 300 unit is supplied with a 3/8 in NPT port, a 40 um filter element, an automatic drain that ejects collected condensate without manual attention, a low-pressure regulator type, an embedded square gauge reading in psi, and a reverse/check valve fitted. No mounting bracket is included with this configuration.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, a choice of drain types, 40 um or 5 um filtration, gauge scale options, and G/NPT thread variants to order. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR300-10 AirTAC Filter Regulator NPT3/8 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Feeds filtered, regulated air to clamp cylinders on a CNC fixture line, with the automatic drain keeping condensate out of the valves between shifts.
Prepares the air feeding bagger and carton-sealer actuators, holding a stable low supply pressure while the square psi gauge gives operators a visible setpoint.
Supplies the cylinders that divert and stop cartons on a sorting conveyor, with the reverse/check valve helping hold downstream pressure if the upstream supply drops.
Choose the size and port step against the air consumption of the circuit: this unit is size 300 with a 3/8 in NPT port. The 40 um element is the standard grade; a 5 um element (code W) is available if finer filtration is needed. The automatic drain suits points where regular manual draining is impractical; manual and differential-pressure drain variants exist in the family. The square gauge is fitted here with a psi scale; MPa and bar scales and an external round gauge are alternatives. PT is the standard thread and G/NPT are order options. This configuration has no mounting bracket; brackets are optional in the family. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your operating pressure and air consumption and we will confirm the correct size from the datasheet on request.
The A in the code sets an automatic drain, which ejects collected condensate by itself instead of waiting for a manual or differential-pressure drain cycle. The L sets the low-pressure regulator type, which is intended for lower setpoint duties than the standard type; the exact regulation range for this variant is not published, so we confirm it on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.