The AirTAC GFR300-10 AirTAC Low-Pressure Filter Regulator, NPT3/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300-10 is a low-pressure filter regulator that removes water and particulate from compressed air and sets downstream pressure in a single 300-size body. This configuration is 3/8 in NPT thread, carries the standard 40 um filter element, and drains condensate by differential pressure, so the bowl empties itself as the pressure differential builds during normal running. The square gauge is fitted and reads in psi, and the low-pressure (L) type is intended for circuits that hold reduced working pressure rather than full line pressure.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, a choice of 40 um or 5 um (W) filtration, manual or automatic drain variants, gauge scale options, and G or NPT thread versions. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR300-10 AirTAC Low-Pressure Filter Regulator, NPT3/8 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Feeds bench instruments and test rigs that need clean, moisture-reduced air held at a low, stable setting rather than full compressor line pressure.
Supplies a filtered, regulated branch to sealing or forming stations on a packaging line where actuators run at reduced working pressure.
Conditions and steps down the pilot supply to pneumatic valve positioners and actuators on a process skid, protecting them from water and debris.
Size and port step up with flow demand: the 300 size with 3/8 in NPT suits mid-range circuits, while larger sizes carry larger ports and more flow. Filter grade is 40 um standard here; choose the W variant if 5 um is needed. Drain is differential-pressure on this unit, which self-drains in service; manual and automatic drain variants exist if you prefer controlled or scheduled emptying. The fitted square gauge reads psi; MPa and bar scales and an external round gauge are alternatives. Thread is NPT as ordered, with PT standard and G available as catalogue options. Bracket is not included on this J-coded unit.
Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the relevant datasheet figures on request before you order.
L marks the low-pressure type of regulator, intended for circuits held at reduced working pressure; the exact range for this type is not published, so confirm it with us. This unit also uses a differential-pressure drain, which empties the bowl automatically as the pressure differential builds during running.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.