The AirTAC GFR30008AF2WGK AirTAC Filter Regulator G1/4 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR30008AF2WGK is an AirTAC GFR300 filter regulator: water and particulate filtration plus pressure regulation combined in a single body with a drain bowl. This configuration carries a G1/4 (1/4 in) port, a 5 um filter element (code W, against the 40 um standard), an automatic drain on the PC (polycarbonate) bowl, an embedded square pressure gauge reading in psi, and a reverse/check valve (code K) fitted; a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and with catalogue choices of drain type, filter grade, gauge and scale, thread (PT standard; G and NPT to order) and bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR30008AF2WGK AirTAC Filter Regulator G1/4 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-08 (two-unit set) |
Filtered, regulated supply for pick-and-place robot grippers on an assembly cell, keeping moisture and fine particles out of the actuator circuit at the point of use.
Point-of-use air preparation for carton-sealing and packaging machine cylinders, with the automatic drain clearing condensate from the bowl between shifts.
Clean, regulated air to spray guns in a paint finishing booth, where the 5 um element helps protect finish quality from particulate carryover downstream.
Step through sizes 200/300/400/600 and the matching port (G1/4 on this unit) against the air demand of your circuit; larger sizes carry larger ports and more flow. Choose the drain: differential-pressure (default), automatic (fitted here) or manual. Choose the filter grade: 40 um standard or 5 um with code W, as fitted on this unit. Gauge options are the embedded square gauge (psi on this unit; MPa or bar scales available) or an external round gauge. Thread is PT as standard, with G and NPT as order options; a bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Ask us and we will confirm the datasheet flow curve for this G1/4, 5 um configuration against your application before you order.
The W code fits a 5 um element instead of the 40 um standard, for finer particulate removal, and the A code gives an automatic drain that discharges condensate from the PC bowl without manual attention. Both are standard catalogue options, and the same series can be ordered with 40 um filtration or a manual or differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.