The AirTAC GFR30008MLJC2T AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30008MLJC2T is a size-300 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has 1/4 in NPT ports, a manual drain bowl in polycarbonate, a 40 um standard filter element, the low-pressure regulator type, an external round pressure gauge with a psi scale, and no mounting bracket. The manual drain lets an operator release collected condensate by hand, so it suits installations where the bowl is checked as part of a routine walk-round.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of PT, G or NPT thread, manual, automatic or differential-pressure drains, a 5 um optional element, gauge and scale choices, and optional brackets. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application before ordering.
| Model | GFR30008MLJC2T AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-08 (two-unit set) |
Supply filtered, regulated air to clamp and hold workpieces on a machining or assembly fixture, with the psi gauge giving the operator a direct reading at the station.
Feed clean, regulated air to the cylinders and actuators on a cartoning or wrapping line, with the manual drain emptied during scheduled line checks.
Provide filtered, low-pressure regulated air to bench-top test rigs and lab instrumentation where a stable, readable supply pressure is part of the setup.
Size 300 with 1/4 in NPT ports is the right step when your line runs at roughly quarter-inch porting; step up to size 400 or 600 for larger ports and higher flow, or down to size 200 for compact circuits. The drain choice matters: manual suits attended installations, while automatic or differential-pressure drains suit unattended duty. The 40 um element is the standard grade; specify the W option for 5 um where finer filtration is needed. The round psi gauge is fitted here; embedded square gauges and MPa or bar scales are alternatives. NPT is ordered as the thread option, with PT as the catalogue standard and G also available. A bracket is not included in this code but can be ordered. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a l/min, m3/h or SCFM number. Tell us your application and we will confirm the flow and datasheet figures on request before you order.
The M in the code specifies a manual drain: condensate collected in the polycarbonate bowl is released by hand. If the unit will run unattended, the same size 300 filter regulator can be ordered with an automatic (A) or differential-pressure (blank) drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.