The AirTAC GFR30010LJC2G AirTAC Filter Regulator G3/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30010LJC2G is a GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This unit is built in the 300 size with a G3/8 (3/8 in) port and G thread, and is the low-pressure regulator type. It carries the standard 40 um filter element, drains condensate by differential pressure, and is fitted with a round gauge reading in psi. The polycarbonate bowl lets you see the condensate level, the unit is rated for -5 to 70 C (non-freezing) with a maximum inlet pressure of 1.0 MPa (145 psi), and this configuration is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options across the family include 5 um filtration (code W), automatic or manual drains, square embedded or external round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR30010LJC2G AirTAC Filter Regulator G3/8 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Feeds cleaned, low-pressure regulated air to clamping fixtures and vises on a CNC machining cell, keeping the hold-down circuit stable while the water and chips-carrying condensate are stripped out upstream of the actuators.
Sits at the drop point where the shop air main feeds a carton-sealing or case-packing line, filtering line moisture and holding a steady low regulated pressure to the cylinder and vacuum circuits downstream.
Conditions the air supply to spray guns and atomizing nozzles in a finishing booth, removing water and particulate that would otherwise blemish the finish while regulating the low atomizing pressure at the gun.
Size and port set the air capacity: this 300-size unit has a G3/8 port; step up to the 400 or 600 size for larger lines. Drain type is a real choice in this family: differential-pressure (as fitted here, no operator action), automatic, or manual. Filter grade is the 40 um standard on this unit; specify the 5 um element (code W) where finer filtration is needed. The fitted round gauge reads in psi; an embedded square gauge and MPa or bar scales are the alternatives. Thread is G on this code, with PT as the standard and G or NPT orderable as options. This code omits the mounting bracket. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the flow from the datasheet on request.
This unit drains collected condensate when the pressure differential across the filter element reaches the drain threshold, so there is no daily manual draining to remember. Automatic and manual drain versions are available in the same GFR family if your application calls for them.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.