The AirTAC GFR30010LJF2WT AirTAC Filter Regulator NPT3/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30010LJF2WT is a size-300 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a 5 um filter element (code W, one step finer than the 40 um standard), a differential-pressure drain that bleeds condensate automatically when the pressure differential across the element rises, an embedded square gauge reading in psi, and a low-pressure regulator type. Ports are 3/8 in NPT thread.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, a choice of drain types, 40 um or 5 um filtration, gauge scale options, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GFR30010LJF2WT AirTAC Filter Regulator NPT3/8, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Feeding filtered, regulated air to a machining centre's pneumatic tool-clamp and chip-clearing circuits, with the 5 um element protecting the clamp cylinder's seals from fine particulate.
Conditioning the air supply to conveyor stopper and pusher cylinders on a packaging line, where the low-pressure regulator type and psi gauge let the line set a gentle, repeatable actuation pressure.
Supplying clean, regulated air to bench-top lab equipment and pneumatic sample-handling fixtures, with fine 5 um filtration guarding sensitive instrument air ports.
Size 300 with 3/8 in NPT ports suits lines that need more flow than the 200/1/4 in step without moving up to the 400/1/2 in frame - match the size step to your required flow and ask us to confirm against the published curves. The 5 um element (W code) is the right pick when downstream valves or instruments want finer particulate control than the 40 um standard; the differential-pressure drain suits a steady-duty installation where you do not want to rely on manual draining. The square gauge reads in psi; MPa and bar scales are also available in the range, and an external round gauge is an option. PT is the standard thread; G and NPT are order options - this unit is the NPT version. No mounting bracket is included with the J code.
Because AirTAC publishes flow as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and required flow and we will confirm the sizing from the datasheet on request.
W is the 5 um filter element option, one step finer than the 40 um standard element. This unit uses a differential-pressure drain, which automatically discharges collected condensate when the pressure drop across the element rises - no manual draining needed under normal duty.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.