The AirTAC GFR30015MLC1T AirTAC Filter Regulator 1/2 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30015MLC1T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is built on the GFR300 size with a 1/2 in NPT port, a polycarbonate bowl with manual drain, and a 40 um filter element. It is the low-pressure regulator type, fitted with an external round gauge reading in MPa, and includes a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um standard or 5 um (W) filtration, gauge and thread options, and standard or low-pressure regulation. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR30015MLC1T AirTAC Filter Regulator 1/2 in NPT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-15 (two-unit set) |
Feeding clean, regulated air to the cylinders and actuators on a carton-forming and sealing line, with the manual drain emptied during shift checks.
Supplying filtered, pressure-controlled air to pneumatic clamps and workholding fixtures on a machining cell, with the MPa gauge read at a glance.
Regulating supply to pneumatic valves and pilot circuits that run below standard plant pressure, where the low-pressure regulator type is the right choice.
The real, decodable choices on this series: step through sizes 200/300/400/600 to match the port and flow band your line needs; choose a manual drain (as fitted here) for operator-emptied bowls, an automatic drain for unattended condensate removal, or the differential-pressure default; select 40 um standard or 5 um (W) filtration; pick the embedded square gauge or an external round gauge with MPa, psi or bar scale; order PT, G (BSPP) or NPT threads; and include or omit the bracket. This unit is the low-pressure regulator type - its exact regulation range is not published in the sheet we work from, so confirm it with us. Flow is published as curves, not a single rating, so ask us to check sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not a single rated figure, so we do not quote a number here. Tell us your line's flow and pressure demand and we will confirm the sizing from the datasheet before you order.
This unit's bowl is fitted with a manual drain: condensate is released by an operator, which suits installations with regular maintenance rounds. If the point of use is unattended, ask about the automatic drain option; the series default is a differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.