The AirTAC GFR30015MLF2TK AirTAC Filter Regulator NPT1/2 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR30015MLF2TK is an AirTAC GFR300 filter regulator: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration is a 1/2 in NPT port unit with a manual-drain polycarbonate bowl, a 40 um standard filter element, the low-pressure regulator type, a reverse/check valve fitted, a mounting bracket included, and an embedded square gauge reading in psi.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of drain (differential-pressure, automatic or manual), an optional 5 um element (code W), gauge scale options in MPa, psi or bar, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR30015MLF2TK AirTAC Filter Regulator NPT1/2 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-15 (two-unit set) |
Feeds filtered, regulated air to clamp cylinders on a CNC machining cell, where the low-pressure regulator type holds a modest set pressure for workholding without over-clamping delicate parts.
Supplies clean, regulated air to diverter and stopper cylinders on a packaging conveyor, with the 40 um element keeping particulate out of directional valves and the manual drain cleared at shift checks.
Conditions supply air for a laboratory or pilot-plant test bench running at reduced pressures, where the low-pressure regulator type, psi gauge and reverse/check valve protect the circuit from upstream loss and backflow.
Size 300 with a 1/2 in port suits lines needing moderate to higher air delivery; step up or down a size if your demand requires it - we can check the published flow curve against your consumption before you order. The manual drain needs periodic operator attention; choose automatic or differential-pressure drain where the unit sits unattended. The 40 um element is standard; specify code W for 5 um where finer particulate removal matters. This is the low-pressure regulator type, so confirm its setting range suits your circuit - we will verify it from the datasheet. The gauge scale here is psi; MPa or bar scales are available. Thread is NPT; PT and G (BSPP) are order options. A mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your air consumption and line pressure and we will confirm the sizing against the datasheet curve before you order.
Code M means the bowl drain is opened by an operator to expel collected water and contaminants. It suits installations visited daily. If the unit sits where nobody tends it, choose automatic drain (A) or differential-pressure drain (blank) instead - both are available in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.