The AirTAC GFR400-10 AirTAC Filter Regulator NPT3/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR400-10 is a size-400 filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This configuration is a low-pressure type with a 3/8 in NPT port, a 40 um standard filter element and a differential-pressure drain that bleeds collected condensate automatically as pressure changes. It comes with an embedded square gauge scaled in bar, a reverse/check valve fitted, and a mounting bracket included. The polycarbonate bowl lets you see the condensate level at a glance.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, drain, filter-grade, gauge, thread and valve options to match. Flow figures for this series are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR400-10 AirTAC Filter Regulator NPT3/8 Low-Pressure |
|---|---|
| Series | GFR400 filter regulator |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-10 (two-unit set) |
Feeds and regulates the air to low-pressure clamping fixtures on a CNC machining centre, keeping chips and condensed water out of the fixture cylinders while the check valve holds the set pressure if supply dips.
Sits at the drop to a spray or coating line, filtering water and pipe scale from the plant air supply and holding a steady, moderate gun pressure so finish quality does not drift through the shift.
Supplies filtered, regulated air to the diverters, pushers and stop cylinders on a packaging conveyor, with the differential-pressure drain clearing condensate automatically during continuous running.
Choose the GFR400-10 when your line runs 3/8 in piping and you need filtration plus regulation in one unit at lower working pressures; step up or down a size if your flow demand or port size differs. The 40 um element is the standard grade for general plant air - pick the 5 um (W) variant only if downstream equipment needs finer filtration. Drain choice matters: the differential-pressure drain fitted here needs no operator attention, while automatic and manual drains are available on other variants. The embedded square gauge reads in bar; external round gauges and MPa/psi scales are options, and G (BSPP) or NPT threads can be ordered instead of the PT standard. Flow for this series is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and line conditions and we will confirm the datasheet flow figures for the GFR400-10 on request before you order.
This unit's differential-pressure drain releases collected condensate automatically whenever the pressure differential across the bowl reaches the discharge point, so no manual draining is needed in normal service. The fitted reverse/check valve (code K) prevents downstream backflow through the unit. If you prefer an automatic or manual drain instead, those variants can be ordered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.