The AirTAC GFR40010LJC2K AirTAC Filter Regulator 3/8in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR40010LJC2K is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This size 400 configuration has PT3/8 ports, the low-pressure regulator type, a 40 um filter element, a differential-pressure drain, a round gauge with psi scale and a built-in reverse (check) valve, and it is ordered without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, plus drain, filter-grade, gauge, thread and bracket options. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR40010LJC2K AirTAC Filter Regulator 3/8in PT |
|---|---|
| Series | GFR400 filter regulator |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-10 (two-unit set) |
Feeding workholding clamps and fixture cylinders on a machining centre where the holding pressure must be set below the normal line pressure and held steady through the cycle.
A point-of-use filter regulator cleaning and setting supply pressure for sealing jaws, vacuum generators and small cylinders on a packaging line, with the check valve holding downstream pressure if the feed dips.
Conditioning atomizing air on a low-pressure spray or coating station, where clean, dry air at a gentle regulated setting keeps the finish consistent.
Size and port set the air capacity: step up from 300 to 400 (or to 600) when the circuit needs a larger port and more flow, and match the 3/8 in PT connection to your piping. Drain type is a real choice: the differential-pressure drain fitted here bleeds the bowl as air passes, while automatic (A) and manual (M) drains are order options. Filter grade is 40 um standard; specify 5 um with code W where finer filtration is needed. This unit carries a round gauge with psi scale; MPa or bar scales and the embedded square gauge are alternatives. Thread is PT as standard, with G (BSPP) and NPT available to order. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves rather than a single rated figure, so we do not quote a number. Tell us your application and we will confirm the datasheet flow curves against it before you order.
L marks the low-pressure regulator type. The exact adjustment range for this variant is not published in the material we hold, so if your set pressure is critical, ask us to confirm the range on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.