The AirTAC GFR400C15LJC2W AirTAC Filter Regulator PT1/2, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR400C15LJC2W is an AirTAC GFR400 filter regulator: one body that removes water and particulate from compressed air and holds the downstream pressure at a set point. This size 400 unit is threaded PT1/2 (1/2 in PT; G and NPT are order options), carries a 5 um filter element, drains collected condensate by differential pressure, and is the low-pressure regulator type. A round gauge with a psi scale is fitted, the drain bowl is metal, and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options that include manual or automatic drains, the 40 um standard element, embedded square or external round gauges in MPa, psi or bar scales, and mounting brackets. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR400C15LJC2W AirTAC Filter Regulator PT1/2, 5 um |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
On a machining centre where workpieces are held by air clamps, this unit filters the shop air and holds a steady, lower set point so delicate parts are gripped without distortion or fixture chatter.
Feeding the fold-and-press cylinders of a case-sealing machine, the regulator keeps actuator pressure consistent between boxes while the 5 um element screens out pipe scale and compressor carryover.
Air-powered pusher gates on a distribution-centre conveyor cycle thousands of times a day; this unit supplies them with cleaned air at a stable, reduced pressure so gate timing stays repeatable through the shift.
Choose the size step (200/300/400/600) against the port and the flow your line needs - flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering. On this configuration the 5 um element (code W) gives finer filtration than the 40 um standard, and the differential-pressure drain bleeds condensate away automatically as the pressure differential across the element rises. Thread is PT as standard, with G (BSPP) and NPT available to order; this unit comes without a bracket, which can be added if you need panel or wall mounting. It is the low-pressure regulator type, and the exact adjustment range is not published in the material we hold, so we will confirm it from the datasheet on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes filter-regulator flow as performance curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for this model on request.
The W code fits a 5 um element, which catches finer particles than the 40 um standard grade - useful where downstream valves and cylinders see dusty or heavily used air. The differential-pressure drain removes collected condensate automatically as the pressure differential across the element rises. If you are unsure which grade suits your line, we will confirm the options from the datasheet on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.