The AirTAC GFR600-20 AirTAC Filter Regulator 3/4 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/4" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600-20 is a size 600 filter regulator that removes water and particulate from compressed air and holds downstream pressure in a single body. This configuration has a 3/4 in NPT port, an automatic drain that bleeds condensate from the aluminium alloy bowl without manual attention, a 40 um standard filter element, and a round pressure gauge reading in bar. A reverse/check valve is fitted, and the unit is supplied with a mounting bracket.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, PT, G and NPT threads, manual, automatic or differential-pressure drains, a 5 um (W) filter element option, gauge and scale choices, and a low-pressure regulator type. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
| Model | GFR600-20 AirTAC Filter Regulator 3/4 in NPT |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-20 (two-unit set) |
Installed at the take-off from a factory compressed-air ring main, it strips water and scale from the supply and holds a steady set pressure for the downstream distribution legs.
Feeding clean, regulated air to carton sealers, case erectors and wrapping machines on a packaging line, where the automatic drain keeps condensate out of valves and cylinders between shifts.
Mounted on the bracket at the inlet of a pneumatic control panel, it conditions and regulates the air feeding directional valves, actuators and air-driven instruments on the panel.
Size 600 with a 3/4 in NPT port suits lines where larger pipework and higher air demand call for the biggest GFR frame; step down to 200/300/400 if your flow curve allows a smaller port. The automatic drain suits unattended or hard-to-reach installations; choose manual or differential-pressure drain if you prefer operator-controlled or pressure-differential condensate release. The 40 um element is standard; specify the W option for 5 um filtration. The round gauge here reads in bar; MPa and psi scales are also available. PT is the standard thread, with G and NPT as order options, and the bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request before you order.
The A in the code selects the automatic drain, which expels collected condensate from the bowl without manual intervention, and C3 selects the round gauge with a bar scale. If you would rather drain by hand or by pressure differential, or read the gauge in MPa or psi, those are alternative order options in the same series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.