The AirTAC GFR600-25G AirTAC Filter Regulator G1 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600-25G is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 600 unit has a G1 (1 in) G-thread port, a manual drain, the standard 40 um filter element, and the low-pressure regulator type. It is fitted with a round gauge reading in psi and a reverse (check) valve, and the aluminium alloy bowl and mounting bracket are included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include automatic or differential-pressure drains, a 5 um element (code W), square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR600-25G AirTAC Filter Regulator G1 Low-Pressure |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Feeding directional valve manifolds on packaging machinery: the unit strips water and particles before the valves and holds a steady low-pressure supply so spool actuation stays consistent shift after shift.
Conditioning the air circuit that drives low-pressure grippers and clamps on a bottling line - the manual-drain bowl lets an operator vent accumulated condensate during scheduled changeovers.
Supplying the pusher and diverter cylinders that divert cartons on a conveyor line, with the check valve holding the set pressure against back-flow and the 40 um element protecting cylinder seals.
Size and port set the air capacity: this is the largest GFR size, 600, with a 1 in G-thread port - step up or down a size when your line's flow demand or piping changes. The decodable choices are the drain (manual here; automatic or differential-pressure are the alternatives), the filter element (40 um standard, 5 um with code W), the gauge (round psi here; embedded square or other scales available), the thread (PT is the standard; G and NPT are order options) and the bracket (included). The regulator is the low-pressure type; its exact adjustment range is not published, so confirm it with us. Flow is published as curves, not a single rating - ask us to check sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so there is no one number we can quote. Tell us your application and we will confirm the relevant flow and datasheet figures on request before you order.
The M in the code means the aluminium alloy bowl is drained by hand, which suits lines with scheduled maintenance rounds. If you prefer unattended condensate removal, the same size is available with an automatic drain (code A) or the differential-pressure drain that is the series default.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.