The AirTAC GFR60020JC2 AirTAC Filter Regulator PT3/4, 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600 series combines water and particulate filtration with pressure regulation in a single body, so one 3/4-inch unit does the job of a separate filter and regulator. This GFR60020JC2 is configured with PT (BSPP-equivalent standard) 3/4-inch ports, the standard 40 um filter element, and a differential-pressure drain that bleeds accumulated condensate automatically whenever the pressure differential across the element rises. The 600 size carries an aluminium alloy bowl, and this code specifies an external round gauge reading in psi. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates in temperatures from -5 to 70 C (non-freezing). No mounting bracket is included with this configuration.
This is a genuine AirTAC part. The GFR filter-regulator family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and can be ordered with automatic or manual drains, a 5 um element (code W), square or round gauges in MPa, psi or bar scales, G or NPT threads, and a mounting bracket. Rated flow for this series is published as curves rather than a single figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR60020JC2 AirTAC Filter Regulator PT3/4, 40 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-20 (two-unit set) |
Installed at the drop feeding nailers, staplers and spray guns in a cabinet shop, it strips water and chips from the shop air and holds a steady set pressure so tools cycle consistently through the shift.
Mounted on the air preparation drop for a bottling or cartoning conveyor, it delivers clean, regulated air to the pusher and clamp cylinders so case ejects and product stops stay repeatable.
Fitted ahead of the solenoid valves on a process plant actuation skid, it filters condensate and particulate out of the supply air and regulates it to the pressure the rack-and-pinion actuators are rated for.
Start with the port and size step: the GFR range runs 200 through 600, and moving up a size gives a larger port and more flow capacity, so match the 3/4-inch PT porting here to your main and your air demand. Then choose the drain: differential-pressure (this unit) drains on load changes, automatic (code A) drains on a timed cycle, and manual (code M) needs someone to press the drain. Filter grade is 40 um standard or 5 um with code W if downstream equipment needs finer protection. Gauge choice is an embedded square gauge or an external round gauge, with MPa, psi or bar scales; this unit carries a round psi gauge. Thread is PT as standard with G and NPT available to order, and a bracket can be added where panel or wall mounting is needed.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so send us your line pressure and air demand and we will confirm the right size from the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we will not quote you a number that is not on the datasheet. Send us your inlet pressure, set pressure and air demand, and we will confirm the sizing from the datasheet curves on request before you order.
The differential-pressure drain on this GFR60020JC2 bleeds condensate automatically whenever the pressure drop across the 40 um element rises, which suits steady-running mains with no extra cost or wiring. Choose code A for automatic draining on a cycle in lines with heavy water loading, or code M for manual draining where an operator is on site and you want full control. All three drain types are order options across the GF, GFR, GFC and GC families.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.