The AirTAC GFR60020JF2W AirTAC Filter Regulator PT3/4, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60020JF2W is a size-600 filter regulator: water and particulate removal plus downstream pressure regulation in a single body, on a PT3/4 (3/4 in) port. This configuration carries the 5 um filter element (code W) for finer cleaning than the standard 40 um grade, a differential-pressure drain that bleeds accumulated condensate automatically as flow passes through, and the embedded square gauge reading in psi. The standard regulator adjusts from 0.15-0.9 MPa (20-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates from -5 to 70 C (non-freezing). The bowl on this size-600 unit is aluminium alloy.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and can be ordered with manual or automatic drains, the 40 um standard element, gauge scales in MPa, psi or bar, G (BSPP) or NPT threads in place of PT, and with or without a mounting bracket. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and datasheet details for your application before ordering.
| Model | GFR60020JF2W AirTAC Filter Regulator PT3/4, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-20 (two-unit set) |
Feeds filtered, pressure-set air to a machining cell's pneumatic clamps and tool-change cylinders, with the 5 um element helping protect fine control valves from water and swarf-carrying condensate.
Conditions the supply to stopper cylinders, diverters and pushers along a packaging conveyor, holding a stable regulated set-point so indexing and ejection strokes stay repeatable through the shift.
Serves as the point-of-use filter regulator ahead of quarter-turn pneumatic actuators on a treatment-plant valve skid, removing moisture and particulate before the supply reaches the positioner and solenoid valves.
Step up through sizes 200, 300, 400 and 600 to match the port and the flow your line needs; this size-600 unit on PT3/4 sits at the top of the range for higher-demand drops. Choose the drain to suit access: differential-pressure (as fitted here) where automatic bleeding during flow is fine, automatic (A) where condensate must clear even at low flow, or manual (M) where you want controlled draining. Pick 40 um for general protection or the 5 um W element, as on this model, where finer cleanliness matters downstream. The embedded square gauge can be ordered in MPa, psi or bar scales; G (BSPP) and NPT threads are order options alongside standard PT, and the J suffix here means no mounting bracket is supplied. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so there is no one figure we can honestly quote for this PT3/4 unit. Send us your application details and we will confirm the relevant flow-curve data and sizing from the datasheet on request.
This model carries the optional 5 um element for finer removal of particulate where downstream valves, actuators or processes are sensitive to contamination. The standard grade is 40 um, which suits general plant air protection; both grades are available across the GFR range, so you can order the element that matches the cleanliness your line needs.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.