The AirTAC GFR60020LJF3WT AirTAC Filter Regulator 3/4 in NPT is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60020LJF3WT is a 600-size filter regulator: one body that removes water and particulate from compressed air and then regulates downstream pressure. This configuration has 3/4 in NPT ports, the 5 um filter element (code W), a differential-pressure drain on the bowl, and the low-pressure regulator type (L code). The square gauge is fitted and reads in bar, and at size 600 the bowl is aluminium alloy. The J code means no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include 40 um or 5 um filtration, differential-pressure, automatic or manual drains, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR60020LJF3WT AirTAC Filter Regulator 3/4 in NPT |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-20 (two-unit set) |
Filtered, regulated air feeding the directional control valves on a packaging line. The 5 um element and regulation stage sit upstream of the valve stack, and the 3/4 in NPT ports suit the main air drop feeding the machine.
Regulated air for the stopper and pusher cylinders along a bottling conveyor. The unit conditions the supply at the point where the conveyor's pneumatic branch taps off the main line.
The low-pressure regulator type suits a fixture-clamping circuit specified for low-pressure operation, with filtered air supplied to the clamping cylinders on a CNC machining cell.
Size and port are the first choice: 200/300/400/600 with ports from 1/8 in to 1 in, stepped against the flow your line needs. This unit is already fixed at 600 size with 3/4 in NPT ports. The drain here is differential-pressure, the catalogue default; automatic (A) and manual (M) drains are available on other codes. The W code selects the 5 um element over the 40 um standard - choose 5 um where downstream valves or instruments need finer air. The fitted square gauge reads in bar, with MPa and psi scales available as alternatives, and an external round gauge is optional. The J code means no mounting bracket; bracketed versions exist. Thread is NPT on this code; PT is the AirTAC standard and G (BSPP) is also available to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Ask us and we will confirm the datasheet curve and check it against your 3/4 in line and required flow before you order.
The W code selects the 5 um element in place of the 40 um standard. Choose 5 um where downstream valves, cylinders or instruments need finer air; the 40 um version is available on other codes in the same size. We can send the datasheet to confirm on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.