The AirTAC GFR60025AJC2 AirTAC Filter Regulator, PT1 1 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025AJC2 is a 600-size filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is threaded PT1 (1 in), carries a 40 um standard filter element, and drains condensate automatically, so the bowl empties itself during operation without manual attention. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and an external round gauge scaled in psi is fitted so set pressure can be read directly. The bowl on this 600 size is aluminium alloy, and the J code means no mounting bracket is supplied.
This is a genuine AirTAC part from the GFR filter-regulator family, which spans 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in. Across the family you can order manual or differential-pressure drains, a 5 um element (code W), square or round gauges scaled in MPa, psi or bar, G or NPT threads, and a bracket where needed. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
| Model | GFR60025AJC2 AirTAC Filter Regulator, PT1 1 in |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
On a beverage bottling line, the GFR60025AJC2 conditions and regulates the air feeding actuated fill and capping valves, with the automatic drain clearing condensate so the valves see clean, dry air at a set pressure without an operator draining the bowl each shift.
In a metal stamping or press shop, this 1 in filter regulator supplies the pneumatic clamps and part-holding fixtures, filtering water and swarf from the main drop and holding a stable regulated pressure so clamping force stays repeatable across the shift.
On a warehouse or packaging conveyor system, the GFR60025AJC2 feeds pop-up diverters, stoppers and gate cylinders, with the 40 um element protecting seals and the round psi gauge letting maintenance verify set pressure at a glance.
Start with the port step: the 600 size is the largest in the GFR range at 1 in, so step up or down (200/300/400/600) according to the flow your line needs - and because flow is published as curves rather than a single rated figure, ask us to confirm the curve against your application before ordering. Choose the drain to match the site: automatic (this model) suits unattended duty, manual suits periodic checks, and differential-pressure is the catalogue default. Filter grade is 40 um standard; order the W code for 5 um where finer filtration is needed. Gauge choice is embedded square or external round, scaled in MPa, psi or bar - this unit carries a round psi gauge. Thread is PT as standard with G (BSPP) and NPT available to order, and a bracket can be added if the J (no bracket) option does not suit your mounting.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and required flow, and we will confirm the sizing against the datasheet curves on request before you order.
The A in the code GFR60025AJC2 specifies an automatic drain, which expels collected condensate from the bowl during operation - useful on lines that run unattended. The GFR family is also available with a manual drain (code M) or the differential-pressure drain (blank) if your maintenance routine suits those instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.