The AirTAC GFR60025F2W AirTAC Filter Regulator PT1 in, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025F2W is a size-600 filter regulator: it removes water and particulate from compressed air and sets downstream pressure in a single body. This configuration carries a PT1 (1 in) port, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain, and an aluminium alloy bowl, which is the bowl material used at size 600. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), and the fitted embedded square gauge reads in psi. Operating temperature is -5 to 70 C (non-freezing), and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with a choice of port sizes, PT, G or NPT threads, manual, automatic or differential-pressure drains, 40 um or 5 um elements, and gauge scale options. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR60025F2W AirTAC Filter Regulator PT1 in, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Point-of-use filtration and pressure setting on the air feed to a paint booth, where the 5 um element helps keep water and particulate out of the atomising air before it reaches the spray guns.
Supplying filtered, regulated air to the pneumatic cylinders that press and seal flaps on a packaging conveyor, with the 1 in port serving a high-consumption section of the line.
Conditioning the air feeding directional control valves on a bottling line, so the valves see clean air at a set pressure from the square psi gauge rather than fluctuating header pressure.
Step up or down through the GFR sizes (200, 300, 400, 600) to match the port and the flow your line needs; this unit sits at the top of the range with a 1 in PT port. Choose the drain to suit access: differential-pressure (as fitted here) drains on load changes, automatic drains unattended, and manual suits supervised points. Pick the element grade for the air quality the downstream equipment expects - 40 um standard or 5 um (this unit) for finer protection. Gauge scale (MPa, psi or bar), thread (PT standard, G or NPT to order) and bracket options complete the decode. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the datasheet flow figures for this 1 in size-600 unit on request before you order.
The W in the code GFR60025F2W selects the optional 5 um filter grade, which is the finer of the two catalogue grades (40 um is the default). Choose 5 um where downstream equipment such as valves, cylinders or spray equipment needs finer protection; the differential-pressure drain and aluminium alloy bowl are unchanged.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.