The AirTAC GFR60025JC2WG AirTAC Filter Regulator G1 (1 in) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025JC2WG is a size 600 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a G1 (1 in) G-thread port, a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element rises, and a fine 5 um filter element (the W grade, one step finer than the 40 um standard). An external round gauge with a psi scale is fitted for setpoint monitoring, and the aluminium alloy bowl suits this largest frame in the series.
This is a genuine AirTAC part. The GFR family spans sizes 200 to 600 with port options from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um elements, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR60025JC2WG AirTAC Filter Regulator G1 (1 in) |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Installed at the take-off from a large compressor ring main, it cleans water and particulate out of the plant air supply and holds a stable regulated pressure for the downstream distribution lines.
Feeding a manifold that serves multiple valve and cylinder circuits on production machinery, it gives one filtered, regulated supply point instead of treating each branch separately.
On heavy clamping, press or material-handling actuators that run on 1 in air lines, it protects the equipment from condensate and debris while letting maintenance set the working pressure on the psi gauge.
Size 600 with a 1 in port is the top of the GFR range, so step up or down (200/300/400/600) according to the air demand of the line rather than the pipe size alone. The 5 um element here suits points where finer particulate matters; the 40 um standard element is the usual choice for general plant air. Drain choice matters: the differential-pressure drain on this unit needs no operator attention, while automatic and manual drains are the other catalogue options. The fitted round gauge reads in psi; square gauges and MPa or bar scales are alternatives. PT is the standard thread, with G and NPT available as order options, and a mounting bracket can be specified (this unit is ordered without one). Flow is published as curves, not a single rating, so send us your flow requirement and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and air demand and we will confirm the flow from the datasheet for this exact model before you order.
This unit has a differential-pressure drain: condensate collected in the aluminium bowl is discharged automatically when the pressure differential across the filter element rises, with no operator intervention. Manual-drain versions are also available in the catalogue if you prefer a drain that operates only when opened.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.