The AirTAC GFR60025JF2K AirTAC Filter Regulator 1 in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR60025JF2K is an AirTAC GFR600 filter regulator: filtration (water and particulate removal) and pressure regulation combined in one body. This configuration is a 600-size unit with a PT1 (1 in) PT thread port, a 40 um standard filter element, a differential-pressure drain and an aluminium alloy bowl. A square pressure gauge reading in psi is fitted, the K code means a reverse (check) valve is installed, and no mounting bracket is supplied with this version.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include 5 um filtration (code W), automatic or manual drains, G (BSPP) or NPT threads, alternative gauge scales and an external round gauge. Maximum inlet pressure is 1.0 MPa (145 psi), the regulation range is 0.15-0.9 MPa (20-130 psi) and the working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR60025JF2K AirTAC Filter Regulator 1 in PT |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Point-of-use filtered and regulated air for spray guns and booths: the 40 um element strips water and particulate that cause finish defects, while the regulator holds a steady set pressure so gun atomisation stays consistent through the shift.
Supplying clean, regulated air to the pneumatic cylinders and grippers that index, divert and stop bottles on a packaging conveyor, with the check valve helping hold the downstream circuit against supply-side interruptions.
A filtered, regulated pilot-air feed for solenoid-piloted ball and butterfly valves on a process skid, where stable pilot pressure keeps valve stroking predictable and the 1 in port matches the plant's main air header.
Choose the size by port and required flow: this 600 unit carries a 1 in PT port at the high-flow end of the GFR range, while sizes 200-400 step down through 1/8 to 3/4 in. Drain options are differential-pressure (this unit, the default), automatic (A) or manual (M); filtration is 40 um standard or 5 um with the W code. The gauge here is the embedded square type reading psi, with MPa and bar scales and an external round gauge as alternatives. Thread is PT as standard, with G (BSPP) and NPT as order options, and J versions omit the bracket. Because flow is published as curves rather than a single rated figure, send us your air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not a single rated figure, so we do not quote a number here. Tell us your air demand and operating pressure and we will confirm the datasheet curve and correct sizing for this 1 in PT port unit before you order.
With no drain letter in the code, this unit uses the differential-pressure drain, the GFR default: it discharges collected condensate as the pressure drop across the filter rises. Automatic (A) and manual (M) drains are available as alternative codes on the same 600-size body - ask us to quote the variant you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.