The AirTAC GFR60025MJF2W AirTAC Filter Regulator PT1 5 um Manual Drain is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025MJF2W is a size 600 filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in a single body. This configuration carries a 1 inch PT port, a 5 um filter element (the finer of the two catalogue grades), a manual drain on the bowl, an embedded square gauge reading in psi, and the standard regulator with an adjustment range of 0.05-0.9 MPa (7-130 psi). The aluminium alloy bowl suits the larger 600 frame, and maximum inlet pressure is 1.0 MPa (145 psi). No bracket is fitted and no reverse/check valve is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um elements, square or external round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GFR60025MJF2W AirTAC Filter Regulator PT1 5 um Manual Drain |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Feeds filtered, regulated air to the tool-change cylinders and pneumatic clamps on a machining centre, with the 5 um element keeping fine debris out of the valve stack and the psi gauge giving operators a setpoint they can read at a glance.
Sits ahead of the cylinder and gripper valves on a filling or capping line, removing condensed water from the header supply and holding a steady working pressure so bottle handling stays repeatable through the shift.
Conditions the air feeding bench-top pneumatic apparatus and test rigs, where the 5 um filtration protects sensitive instruments and the manual drain suits a supervised workspace that is checked daily.
Step up to size 600 with the 1 inch port when the line's air demand is at the top of the GFR range; smaller sizes (200/300/400) cover lighter duties at lower ports. This unit is ordered with a manual drain, so someone drains the bowl on a routine - choose the automatic or differential-pressure drain option instead if the installation is unattended. The 5 um element here is the finer choice; the 40 um grade is the standard option where only coarse protection is needed. The square gauge is fitted in a psi scale; MPa or bar scales and an external round gauge are alternatives. Thread is PT as standard, with G and NPT available to order, and this code carries no mounting bracket (J).
Because catalogue flow is published as curves and not as a single rated number, ask us to confirm the flow and datasheet figures against your application before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 as curves rather than a single rated figure, so there is no one l/min or SCFM number we can honestly quote. Tell us your line pressure and the air demand of the equipment downstream, and we will confirm the flow and datasheet figures for this model on request before you order.
The M in the code selects a manual drain: the bowl is emptied by hand on a routine, which suits attended installations; automatic and differential-pressure drain versions exist for unattended lines. The W in the code selects the 5 um element, the finer of the two catalogue grades (40 um is standard), for better protection of downstream valves and actuators.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.