The AirTAC GFR600C20AC2WG AirTAC Filter Regulator G3/4 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600 is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in a single body. This configuration is the 600 size with a G3/4 (BSPP) port, 5 um filtration (code W), an automatic drain and a round gauge reading in psi. The bowl on the 600 frame is aluminium alloy, maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series spans sizes 200 to 600 with ports from 1/8 to 1 in, a choice of 40 um standard or 5 um (W) filtration, differential-pressure, automatic or manual drains, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR600C20AC2WG AirTAC Filter Regulator G3/4 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Filtered, regulated air to the gripper and clamp cylinders on a beverage bottling line, with the automatic drain clearing condensate through continuous shifts and the psi gauge letting technicians set the supply pressure.
Clean, steady air to clamping circuits on a machining centre; the 5 um grade protects downstream clamp valves from particulate while the regulator holds a consistent clamping pressure.
Regulated supply to diverter and stopper cylinders on a sorting conveyor, where the round psi gauge gives line staff a visible setpoint to check during changeovers.
Size the unit against the flow your line needs: 600 is the largest GFR frame, here with a G3/4 port. Drain type is a real decision - the automatic drain on this unit expels condensate without manual attention, while manual and differential-pressure drains are available elsewhere in the series. Filtration is 5 um here (40 um is the standard grade), the gauge reads in psi, and PT and NPT thread variants can be ordered alongside this G (BSPP) version; a mounting bracket is included. Because AirTAC publishes flow as curves rather than a single rated figure, send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Send us your application details and we will confirm the flow and the full datasheet on request.
The automatic drain on this unit expels collected condensate without anyone having to open it, which suits unattended or continuous-duty installations. Manual and differential-pressure drains are catalogue options in the GFR series, as are the 40 um standard grade and MPa or bar gauge scales, if another combination suits your plant better.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.