The AirTAC GFR600C20ALC1WT AirTAC Filter Regulator NPT3/4 Low Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600 series is a filter regulator: one body removes water and particulate from compressed air and regulates downstream pressure. This GFR600C20ALC1WT is the size 600 unit with a 3/4 in NPT port, a 5 um filter element (code W, against the 40 um standard), an automatic drain on the bowl, the low-pressure regulator type, a round external gauge scaled in MPa, and the mounting bracket included. At size 600 the bowl is aluminium alloy.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filtration, standard or low-pressure regulation, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR600C20ALC1WT AirTAC Filter Regulator NPT3/4 Low Pressure |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Mounted at the drop feeding carton-sealers and case erectors on a packaging line, it strips condensed water and particles from the shop air and holds a steady, reduced regulated pressure so the sealing cylinders cycle consistently shift after shift.
On an assembly fixture where pneumatic clamps must not see full line pressure, the low-pressure regulator type lets the circuit run at a reduced setting, while the 5 um element keeps dirt out of the clamp valves and fixture cylinders.
Feeding air knives or blow-off nozzles across a conveyor drying station, the unit filters the supply and regulates it to the pressure the nozzle manifold was set up for, with the automatic drain handling condensate without daily attention.
Choose the size by port and required flow: 600 is the largest GFR frame, here with a 3/4 in NPT port. This unit is already specified with the automatic drain (the bowl discharges condensate without attention), the 5 um element for finer filtration than the 40 um standard, the low-pressure regulator type, and a round MPa gauge. If your panel reads psi or bar, a different gauge scale can be ordered; PT and G threads and a no-bracket version are catalogue options too. Because AirTAC publishes flow as curves rather than a single rated figure, send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one number we can quote. Send us your required flow and the upstream and downstream pressures, and we will read the sizing off the datasheet and confirm it for your application before you order.
The drain is how collected condensate leaves the bowl. This unit carries code A, the automatic drain, which discharges condensate without anyone opening the bowl - useful on lines that are not checked every day. Manual and differential-pressure drains are the other catalogue choices if you prefer a different arrangement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.