The AirTAC GFR600C20ALJF2TK AirTAC Filter Regulator NPT3/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600 is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at a set value in one body. This GFR600C20ALJF2TK is the size-600 unit with a 3/4 in NPT port, the low-pressure regulator type, an automatic drain on the aluminium alloy bowl, standard 40 um filtration, a built-in square gauge reading in psi, and a fitted reverse (check) valve. It is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the G-series range, which spans sizes 200, 300, 400 and 600 with PT, G and NPT thread options, differential-pressure, automatic or manual drains, and 40 um or 5 um (code W) filter grades. Flow is published only as curves rather than a single rated figure, so ask us to confirm flow and other datasheet values for your application on request.
| Model | GFR600C20ALJF2TK AirTAC Filter Regulator NPT3/4 Low-Pressure |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Point-of-use conditioning ahead of low-pressure actuators on a bottling or canning line, where the automatic drain clears collected condensate from the bowl without daily attention.
Feeding filtered, regulated air to tool-clamp and chip-clearing circuits on a machining center, with the fitted check valve blocking reverse flow if the supply is interrupted.
Conditioning the air supply to divert gates and stopper cylinders on a distribution conveyor, keeping moisture and debris out of the valves that position the gates.
Size steps from 200 to 600 as flow demand grows; this unit is the 600 frame with a 3/4 in NPT thread (PT is the standard thread; G and NPT are order options). The L code makes this the low-pressure regulator type, so confirm the setting range against your line pressure with us before ordering. Drain choices are differential-pressure (the default), automatic (this unit) and manual. Filter grade is 40 um standard, 5 um with code W. Gauge scales are MPa, psi or bar; this unit reads psi on the embedded square gauge, with an external round gauge available as an option. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number. Send us your flow and pressure requirements and we will confirm the sizing from the datasheet on request.
The A in the code fits an automatic drain, which expels collected condensate without manual attention. Differential-pressure (the series default) and manual drains are also available in this family - tell us which you prefer when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.