The AirTAC GFR600C20MLJC2W AirTAC Filter Regulator PT3/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR600C20MLJC2W is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This size 600 unit is fitted with PT3/4 (3/4 in) ports, a 5 um filter element (the W grade, finer than the 40 um standard), a manual drain on the bowl, and the low-pressure regulator type. On size 600 units the bowl is aluminium alloy. This configuration carries an external round gauge with a psi scale; no mounting bracket is included and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options include differential-pressure, automatic or manual drains, 40 um or 5 um filtration, embedded square or external round gauges in MPa, psi or bar scales, G or NPT threads, and brackets. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR600C20MLJC2W AirTAC Filter Regulator PT3/4, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Filters and regulates the air feeding pneumatic clamps on a machining or assembly fixture where the circuit runs at reduced pressure; the 5 um element helps keep valve and seal surfaces clean.
Supplies filtered, regulated air to the actuation circuits of a packaging or cartoning machine, with the manual drain letting an operator release collected water at each scheduled check.
Feeds spray guns in a paint or coating booth, where 5 um filtration supports finish quality and the regulator holds gun supply pressure steady at the lower setting the job calls for.
The real choices in this family are the size and port step (200/300/400/600 with ports from 1/8 to 1 inch), matched to the flow your line needs; the drain type (differential-pressure as standard, automatic, or manual as fitted here); the filter grade (40 um standard, 5 um as on this unit); the gauge (embedded square by default, external round optional, in MPa, psi or bar scales); the thread (PT standard, with G and NPT available to order); and whether a bracket is included. This unit is also the low-pressure (L) regulator type, and the catalogue does not publish an exact adjustment range for that version - ask us to confirm it. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for this 3/4 in unit on request.
The M in the code selects a manual drain: an operator opens the drain to release water collected in the bowl rather than relying on an automatic mechanism. AirTAC also offers automatic and differential-pressure drains on GFR units if you would prefer not to depend on scheduled draining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.