The AirTAC GFR600C25ALJF1T AirTAC Filter Regulator NPT1 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR600C25ALJF1T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in a single body. This size 600 unit carries a 1 in NPT port, a 40 um standard filter element, an automatic drain that clears collected condensate without manual attention, and an embedded square pressure gauge scaled in MPa. It is the low-pressure regulator type, the bowl is aluminium alloy, no mounting bracket is included, and the maximum inlet pressure is 1.0 MPa (145 psi) with an operating temperature of -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, PT as the standard thread and G or NPT to order, plus choices of drain type, 40 um or 5 um filtration, gauge style and scale, and bracket or no bracket. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures and the datasheet for your application.
| Model | GFR600C25ALJF1T AirTAC Filter Regulator NPT1 Low-Pressure |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Filtering and regulating the main air feed to clamps, tool changers and actuators in a machining cell, with the automatic drain clearing condensate between shifts.
Conditioning the supply to cylinder-driven filling, capping and conveyor stops on a bottling line, where the low-pressure regulator holds a gentle setting.
Preparing air for rack-and-pinion actuators on large process valves, keeping the supply filtered and the pressure steady at a low set point.
Choose the size by port and required flow: size 600 sits at the top of the GFR range with a 1 in port, one step up from size 400 (3/4 in). Drain options are automatic (fitted here), manual, or the differential-pressure default; automatic suits unattended installations. The 40 um element is standard - specify code W for 5 um where finer filtration is needed. Thread is NPT on this unit; PT is the catalogue standard and G (BSPP) is also available to order. The square gauge is scaled in MPa, with psi or bar scales and an external round gauge as options, and code J means no mounting bracket. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 series as curves, not a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow from the datasheet on request.
The L marks the low-pressure regulator variant of the GFR600. The exact adjustment range for this variant is not published in our data, so ask us to confirm that it covers your set point before ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.