The AirTAC GR200-06C2T AirTAC Air Pressure Regulator NPT1/8 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR200-06C2T is an AirTAC GR-series air pressure regulator: it does one job, holding a steady downstream pressure from a compressed-air supply. This size 200 unit has a 1/8 in NPT port, a standard adjustment range of 0.05-0.9 MPa (7-130 psi) and a maximum inlet pressure of 1.0 MPa (145 psi). A round pressure gauge with a psi scale is fitted so the setpoint can be read directly, and the unit is supplied with a mounting bracket; the GR body is also panel-mountable. Operating temperature is -20 to 70 C, wider than the rest of the G family. As a pure regulator it has no filter bowl and no drain - pair it with a GF filter upstream if the air line needs water and particulate removal.
This is a genuine AirTAC part. The GR series spans sizes 200 to 600 with ports from 1/8 in to 1 in, thread options of PT (standard), G and NPT, an optional low-pressure type limited to 0.4 MPa, an optional reverse/check valve, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GR200-06C2T AirTAC Air Pressure Regulator NPT1/8 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (NPT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
On a bench-top press or clamp fixture driven by a compact pneumatic cylinder, this 1/8 in NPT regulator sets and holds the clamping pressure so parts are held consistently without overloading the mechanism.
Instrument air to a lab analyser or sample-handling manifold must sit at a fixed, repeatable pressure; the fitted psi gauge lets a technician verify the setpoint at a glance, and the -20 to 70 C rating covers unheated rooms.
Individual actuators on a packaging line - sealing arms, diverters, small grippers - often need a lower pressure than the main header; a local GR regulator at each drop lets the setpoint be tuned per station without touching the plant supply.
Start with the port: this unit is 1/8 in NPT on the size 200 body, the smallest GR step. If your line runs more air than a 1/8 in connection comfortably carries, step up to size 300, 400 or 600 - each size brings a larger port and more flow capacity, and we can confirm the flow curves against your demand before you order. Set the downstream pressure anywhere in the 0.05-0.9 MPa (7-130 psi) range; if your process must never exceed 0.4 MPa, the low-pressure L variant is the safer choice. Gauge scale is a real decision: this configuration ships with a round psi gauge, and MPa or bar scales are available if your team reads metric. Thread is NPT here; PT is the catalogue standard and G (BSPP) can be ordered. A reverse/check valve (K) can be fitted if you need the downstream circuit held when upstream pressure is lost, and the J code deletes the bracket if you are panel-mounting.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes GR flow as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your line pressure, set pressure and air demand and we will confirm the flow data from the datasheet for this exact model before you order.
GR is a regulator only: it reduces and holds downstream pressure and has no bowl, no drain and no filtration. If your air line also needs water and particulate removal, put a GF filter upstream, or choose a GFR filter-regulator or a GC three-unit F.R.L. set instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.