The AirTAC GR20006F1T AirTAC Air Pressure Regulator, NPT1/8 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006F1T is an AirTAC GR200 air pressure regulator for compressed air, fitted with a 1/8 in NPT port. It regulates downstream pressure across a 0.05-0.9 MPa (7-130 psi) adjustment range with a maximum inlet pressure of 1.0 MPa (145 psi), and it carries a square pressure gauge with an MPa scale so the set pressure can be read directly at the unit. As a GR-series regulator it performs pressure regulation only - there is no filter, no bowl and no drain to maintain. It is rated for ambient and media temperatures of -20 to 70 C, the widest range in the G family, and comes with a mounting bracket; GR regulators can also be panel-mounted.
This is a genuine AirTAC part. The GR line is available in sizes 200, 300, 400 and 600 with a choice of PT (standard), G (BSPP) or NPT threads, gauge scales in MPa, psi or bar, and a low-pressure type option. Because rated flow for GR regulators is published as curves rather than a single figure, we confirm the datasheet and flow data for your application on request.
| Model | GR20006F1T AirTAC Air Pressure Regulator, NPT1/8 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (NPT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Set a stable, repeatable downstream pressure for clamp cylinders on a milling or drilling fixture, with the MPa gauge giving the operator a direct readout of the clamping setpoint at the fixture drop.
Feed a dedicated regulated branch to the cylinders and air jets on a packaging or cartoning line, keeping actuator pressure isolated from upstream fluctuations in the plant ring main.
Trim supply pressure to a pick-and-place gripper circuit at the cell, so delicate parts are handled gently without re-plumbing the main FRL set upstream.
Start with the size and port: GR200 is the smallest step in the GR range, and the 1/8 in port here suits compact lines and low-to-moderate air demand - step up to GR300/400/600 when the circuit needs a larger port and more flow. Choose the gauge scale to match your plant standard (this unit is MPa; psi and bar are orderable alternatives) and specify the thread your pipework uses: PT is the standard, with G (BSPP) and NPT as catalogue options. A low-pressure type (L) is available where setpoints stay at or below 0.4 MPa, and the bracket can be omitted (J) if panel mounting is planned. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes regulator flow as curves rather than a single rated figure, so we do not quote a l/min or SCFM number. Tell us your application and we will confirm the flow data from the datasheet on request.
Yes. This unit is supplied with a square gauge on an MPa scale and an NPT port, but the GR line is orderable with psi or bar gauge scales, and with PT (standard) or G (BSPP) threads as catalogue options - just specify when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.