The AirTAC GR20006F2T AirTAC Air Pressure Regulator NPT1/8 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006F2T is an AirTAC GR-series air pressure regulator, a genuine AirTAC part dedicated to one job: holding a stable, adjustable downstream pressure from a compressed-air supply. This size 200 unit has a 1/8 in NPT port, a standard regulation range of 0.05-0.9 MPa (7-130 psi), and a maximum inlet pressure of 1.0 MPa (145 psi). The fitted embedded square gauge is scaled in psi, so operators can read and set the working pressure directly at the unit. As a pure regulator it carries no filter, no bowl and no drain, and it does not lubricate the air.
The GR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, in PT (standard), G (BSPP) or NPT thread, with square or round gauges in MPa, psi or bar scales, a low-pressure variant, and an optional reverse/check valve. GR units run from -20 to 70 C, wider than the rest of the G series, and can be bracket-mounted or panel-mounted. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GR20006F2T AirTAC Air Pressure Regulator NPT1/8 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (NPT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
A 1/8 in port regulator is a natural fit at a compact clamping fixture: set the holding pressure once on the psi gauge so small cylinders grip parts consistently without over-clamping delicate components.
On a small robotic pick-and-place station, feed the gripper or vacuum-ejector manifold through this regulator and dial in the pressure that gives positive part release without disturbing lightweight pieces.
For laboratory rigs and test benches running small air cylinders or air bearings, the -20 to 70 C operating window, 1/8 in NPT connection and local psi readout make this a tidy point-of-use pressure setting station.
Start with the port step: this GR20006F2T is the size 200 unit on a 1/8 in NPT thread, the smallest combination in the GR range, so step up to size 300, 400 or 600 if the line's flow demand calls for a larger port. Because flow is published as curves and not as a single rated number, ask us to confirm sizing against your application before ordering. Other decodable choices: gauge scale (this unit ships with the embedded square gauge in psi; MPa or bar scales and an external round gauge are order options), thread (PT is the standard, G and NPT are catalogue options such as this NPT version), the low-pressure L type (up to 0.4 MPa) where the circuit cannot tolerate standard range settings, the optional K reverse/check valve, and bracket or panel mounting.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes GR regulator flow as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your line pressure, set pressure and expected air demand, and we will confirm the sizing against the datasheet curves on request before you order.
The F2 code in GR20006F2T specifies the embedded square gauge with a psi scale, which suits US-market panels read in psi. If you prefer bar or MPa, or want the optional external round gauge instead of the embedded square one, those are catalogue order options on the same GR200 regulator body.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.