The AirTAC GR20006JC2 AirTAC Air Regulator 1/8 inch PT, psi gauge is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006JC2 is an AirTAC GR-series air pressure regulator in the 200 size with a 1/8 inch PT port. It performs regulation only - no filtration, no bowl, no lubrication - with a standard adjustment range of 0.05-0.9 MPa (7-130 psi) on compressed air, a maximum inlet pressure of 1.0 MPa (145 psi) and a working temperature range of -20 to 70 C. The J selects the no-bracket option, and C2 provides an external round gauge scaled in psi for shops that read pressures in imperial units.
This is a genuine AirTAC part. The GR series spans 200 through 600 sizes with ports from 1/8 to 1 inch, G (BSPP) and NPT thread options, a low-pressure type (L) limited to 0.4 MPa, a reverse/check valve option (K), and panel-mountable bodies. Flow is published as curves rather than a single rated figure; we confirm flow and datasheet figures on request.
| Model | GR20006JC2 AirTAC Air Regulator 1/8 inch PT, psi gauge |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Fit into control panels whose existing gauges and documentation are in psi, keeping pressure readings consistent across the panel without conversion.
Set the air pressure to light pneumatic presses and forming fixtures so cycle force matches the process setup specified in imperial units.
Regulate the shop-air feeds to dock levellers, trailer doors and other loading-bay equipment that is specified and maintained in psi.
The 200 size with a 1/8 inch port suits the smallest supply lines; choose 300/400/600 for larger ports and higher flow. This version combines the no-bracket J option with an external round gauge reading in psi; swap to C1 for MPa, C3 for bar, or use the embedded square gauge instead. The K reverse/check valve is available if needed, and PT is the standard thread with G (BSPP) and NPT as catalogue options to order. Because GR flow is published only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
No single rated flow figure exists for this regulator - AirTAC publishes GR performance as flow curves. Provide your application's flow and pressure requirements and we will confirm the correct size from the datasheet on request.
The scale digit chooses the unit: 1 for MPa, 2 for psi and 3 for bar, with C for the external round gauge or F for the embedded square gauge. This code, C2, gives a round gauge reading in psi; choose C1, C3, F1, F2 or F3 for the other combinations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.