The AirTAC GR20006JF2G AirTAC Air Pressure Regulator G1/8 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006JF2G is an AirTAC GR-series air pressure regulator: it does one job, holding downstream pressure steady at the value you set. This GR200 unit is built around a G1/8 (1/8 in) female port with G (BSPP) thread, and the trailing code confirms a square pressure gauge fitted with a psi scale. The standard-type regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi), with a maximum working (inlet) pressure of 1.0 MPa (145 psi), and it operates in temperatures from -20 to 70 C - a wider window than the rest of the G-series families.
This is a genuine AirTAC part. The GR family spans four sizes (200, 300, 400, 600) with ports stepping up from 1/8 in to 1 in, so the same regulation logic scales with your flow demand. Options across the line include a low-pressure type (up to 0.4 MPa), a reverse/check valve, different gauge scales (MPa, psi or bar), and PT, G or NPT thread. Because AirTAC publishes regulator flow as curves rather than a single rated figure, we confirm the exact flow and datasheet figures for your application on request.
| Model | GR20006JF2G AirTAC Air Pressure Regulator G1/8 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Set and hold a stable, repeatable clamping pressure on a pneumatic press or workholding fixture, so every cycle grips the part at the same force without drifting as the compressor cycles.
Feed the small-bore cylinders on a carton sealing or labelling machine from a 1/8 in regulated branch, keeping wrapper tension and sealing-bar pressure consistent across the shift.
Regulate the low-pressure supply to hold-down rollers, diverters and stop gates on a conveyor line, so product handling stays gentle and repeatable regardless of header pressure swings.
Start with the port and size step: GR200 with its 1/8 in port suits the smallest branch lines, while GR300, GR400 and GR600 carry progressively larger ports for higher-demand circuits - match the step to your line size and required flow. Set the adjustment range against your working pressure: this standard type covers 0.05-0.9 MPa (7-130 psi); if your circuit sits below 0.4 MPa, the GR low-pressure (L) type is the better fit. Choose the gauge scale you want to read - this unit ships with a square gauge in psi, and MPa or bar scales are available. Thread is your next choice: PT is the AirTAC standard, with G (BSPP, as this unit carries) and NPT as catalogue options to order. A mounting bracket can be included or omitted - this configuration omits it - and GR bodies are also panel-mountable.
One honest note on sizing: AirTAC publishes regulator flow as curves, not a single rated number, so there is no one flow figure to quote here. Send us your line pressure, set pressure and expected air demand, and we will confirm the right size against the datasheet before you order.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes regulator flow as performance curves rather than a single rated figure, so there is no one flow number we can honestly quote. Send us your inlet pressure, set pressure and expected air consumption, and we will confirm the flow for this exact G1/8 unit from the datasheet on request.
The GR20006JF2G carries a square pressure gauge with a psi scale, as decoded from its code. AirTAC also offers MPa and bar scales across the GR range, and an external round gauge is available as an option, so you can order a variant that matches the units your technicians already read.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.