The AirTAC GR20006JF2K AirTAC Air Pressure Regulator PT1/8 with Gauge is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006JF2K is an AirTAC GR-series air pressure regulator: it does one job, holding a stable downstream pressure from your compressed-air supply. This 200-size unit is ported PT1/8 (1/8 in, PT thread standard), is the standard (not low-pressure) type with a regulation range of 0.05-0.9 MPa (7-130 psi), and carries a fitted embedded square gauge scaled in psi so the setting can be read at a glance. The K code means a reverse (check) valve is fitted, and the J code means no mounting bracket is included; as a GR-series body it can also be panel-mounted. GR has no filter and no bowl, so it regulates only and does not remove water or particulate.
This is a genuine AirTAC part. The GR line spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, gauge scales in MPa, psi or bar, a low-pressure type (L) rated up to 0.4 MPa, and G or NPT thread variants to order. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -20 to 70 C, wider than the rest of the G family. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application.
| Model | GR20006JF2K AirTAC Air Pressure Regulator PT1/8 with Gauge |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Set and hold the clamping pressure for air-actuated clamps on a weld fixture, with the psi-scaled square gauge letting operators verify the setting at the station.
Regulate the feed pressure to a packaging machine's directional-valve manifold so cylinders and actuators see a consistent setting shift to shift.
Give a lab or QC test bench a fine, repeatable air pressure setting for instrument and component checks, with the check valve holding the set point against supply dips.
Start with the port step: the 200 size here is the smallest GR frame at PT1/8, and moving up through 300, 400 and 600 buys larger ports and more flow capacity, so size against the air your circuit actually uses. Then set the gauge: this unit is supplied with an embedded square gauge scaled in psi, and MPa or bar scales plus an external round gauge are catalogue options. Choose the thread deliberately - PT is the standard on this code, with G (BSPP) and NPT available to order - and note that this J-coded unit ships without a bracket, though GR bodies are panel-mountable. If your supply pressure stays below 0.4 MPa, the L low-pressure type is the correct variant instead of this standard type.
Be honest about sizing: AirTAC publishes GR flow as curves, not a single rated number, so send us your application details and we will confirm the datasheet figures before you order.
Quick checklist
The reflux valve lets air flow back through the regulator, which is useful when downstream volume must vent quickly. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes GR-series flow as curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your application details and we will confirm the datasheet flow figures for this 200-size, PT1/8 regulator before you order.
K means a reverse (check) valve is fitted, so downstream pressure is held if the supply drops. F2 means the embedded square gauge is scaled in psi; MPa (1) and bar (3) scales are catalogue options. The code also tells you the rest: GR200 is the 200 size, 06 is the PT1/8 port, J means no mounting bracket, and with no G or T suffix the thread is PT.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.