The AirTAC GR20006JF2T AirTAC Air Pressure Regulator NPT1/8 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006JF2T is an AirTAC GR200 series air pressure regulator for compressed air, fitted with a 1/8 in NPT port. This is the standard-type regulator with an embedded square pressure gauge scaled in psi, and the J code means no mounting bracket is supplied, though the GR series is also panel-mountable. It regulates downstream pressure across a 0.05-0.9 MPa (7-130 psi) adjustment range with a maximum inlet (working) pressure of 1.0 MPa (145 psi), and operates in temperatures from -20 to 70 C, a wider range than the rest of the G family. As a regulator it performs pressure control only: it contains no filter, no drain bowl and no lubricator.
This is a genuine AirTAC part. The GR series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and is available with G (BSPP) or NPT threads as order options, an optional external round gauge, a low-pressure type (up to 0.4 MPa) and a reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and flow figures for your application on request.
| Model | GR20006JF2T AirTAC Air Pressure Regulator NPT1/8 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (NPT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Set a stable, repeatable downstream pressure feeding clamp cylinders on a CNC fixture, so workholding force stays consistent from part to part while the square psi gauge gives the operator a direct reading.
Trim the branch pressure feeding small packaging-machine cylinders and air pilots, keeping actuator speeds predictable and protecting downstream components from supply-line pressure swings.
Give a test bench or assembly station its own local pressure control on a 1/8 in NPT air drop, letting a technician dial in and read the exact psi needed for the task at hand.
Start with the port size: this unit is the 200 size with a 1/8 in NPT port, and the GR series steps up through 300, 400 and 600 with larger ports and higher flow capacity, so match the size to the air demand of the circuit rather than only the pipe thread. Choose the gauge to suit the operator: this configuration carries the embedded square gauge in psi; MPa and bar scales and an external round gauge are alternatives in the series. Thread is decodable too: PT is the standard, while G (BSPP) and NPT are catalogue options ordered by suffix, and this code's T specifies NPT. The J code omits the mounting bracket, and the standard type covers the full 0.05-0.9 MPa range, with a low-pressure L variant (up to 0.4 MPa) available if the circuit needs it.
One honest note on sizing: AirTAC publishes GR flow as curves, not as a single rated number, so we do not quote a flow figure here. Send us your application details and we will confirm the right size against the datasheet curves before you order.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes GR-series flow as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your application details and we will confirm the datasheet and flow curves for this 200-size, 1/8 in NPT regulator on request, so you can size it against your actual air demand before ordering.
Both come straight from the model code. The F2 in GR20006JF2T specifies the embedded square gauge with a psi scale (MPa and bar scales are alternatives in the series), and the trailing T specifies the NPT thread; PT is the standard thread and G (BSPP) is also a catalogue option. The J code means no mounting bracket is included, though the GR series is panel-mountable.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.