The AirTAC GR20006LC1T AirTAC Air Pressure Regulator NPT1/8 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.4 MPa (7 - 58 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR20006LC1T is a genuine AirTAC GR-series air pressure regulator: it does one job, holding a steady downstream air pressure from a compressed-air supply, and it carries no filter, no bowl and no lubricator. This unit is the 200 size with a 1/8 in NPT port, built as the low-pressure type, so its setpoint range tops out at 0.4 MPa - the right choice for circuits that must never see full line pressure. The trailing T orders the NPT thread, the C in the code fits the external round pressure gauge, and the 1 selects the MPa scale. Maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -20 to 70 C, wider than the rest of the G family.
This is a genuine AirTAC part. The GR line spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, in standard and low-pressure types, with embedded square or external round gauges in MPa, psi or bar scales, optional reverse/check valve, and PT, G or NPT threads. We confirm flow and datasheet figures on request - flow for this series is published as curves rather than a single rating.
| Model | GR20006LC1T AirTAC Air Pressure Regulator NPT1/8 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (NPT thread) |
| Regulating range | 0.05 - 0.4 MPa (7 - 58 psi) |
| Pressure type | Low-pressure type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| L | Low-pressure type — 0.05 - 0.4 MPa (7 - 58 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.4 MPa (7 - 58 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
A compact 200-size regulator on the supply line to a small pick-and-place bench keeps cylinder and gripper pressure low and steady, protecting delicate parts from over-force on every cycle.
Set at the gun manufacturer's low recommended pressure, the low-pressure GR20006LC1T caps the atomizing-air feed at the booth so finish quality stays repeatable shift after shift.
On the blow-off line of a cartoning machine, a low-pressure setpoint holds the air knife gentle enough for thin film and labels while the round MPa gauge gives the operator a clear setpoint readout.
Size the GR by the port step against the air demand of the circuit: this 200-size unit carries a 1/8 in NPT port, and the larger 300/400/600 sizes step up through 1/4, 3/8, 1/2, 3/4 and 1 in for higher flow paths. Because flow for this series is published as curves, not a single rated figure, ask us to confirm sizing against your application before ordering. The L in this code marks the low-pressure type, limited to 0.4 MPa set pressure - choose the standard type instead if you need the full 0.05-0.9 MPa range. The C1 code fits the external round gauge on the MPa scale; a square embedded gauge and psi or bar scales are the other catalogue choices. Thread is NPT here; PT is the standard thread and G (BSPP) is also an order option. A mounting bracket is included, and GR also panel-mounts.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes GR-series flow as characteristic curves, not as a single rated number, so we do not quote a l/min or SCFM figure. Send us your application details and we will confirm the sizing from the datasheet curves on request before you order.
L marks the low-pressure regulator type, whose setpoint range tops out at 0.4 MPa instead of the standard 0.05-0.9 MPa. C fits the external round gauge and 1 selects its MPa scale. The trailing T orders the NPT thread; PT is standard and G (BSPP) is also available to order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.