The AirTAC GR60025JF2G AirTAC Air Pressure Regulator G1 (1 in) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
The GR60025JF2G is an AirTAC GR-series air pressure regulator for compressed air, built in the largest 600 size with a G1 (1 in) G-thread port. It is a regulation-only unit: it steps supply pressure down to a stable working setting anywhere in its 0.05-0.9 MPa (7-130 psi) adjustment range, with a maximum inlet pressure of 1.0 MPa (145 psi). This configuration carries the standard embedded square gauge scaled in psi, and the J suffix means no mounting bracket is fitted; the GR body is also panel-mountable. Operating temperature is -20 to 70 C, wider than the rest of the G family.
This is a genuine AirTAC part from the GR regulator line, which spans 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in, standard or low-pressure regulation, gauge scale choices, an optional reverse/check valve, and bracket or no-bracket mounting. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GR60025JF2G AirTAC Air Pressure Regulator G1 (1 in) |
|---|---|
| Series | GR600 pressure regulator |
| Port size | PT1" (G (BSPP) thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GR600 | G-series pressure regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR600 · PT1" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size down | GR400 |
| Line order | Filter first, then regulator, then lubricator |
Installed at the 1 in main drop feeding a plant-wide compressed-air ring, holding a steady header pressure for every downstream branch circuit.
Set ahead of a pneumatic forming or clinching press, giving the operator a fixed, repeatable working pressure for consistent clamping force.
Placed on the supply to carton-sealing and case-erector cylinders on a packaging conveyor, keeping actuator speed and holding force stable as demand varies.
Choose the GR size by the port and flow your line needs: this 600 unit takes a 1 in port, the largest in the range, so it suits high-consumption headers and main-line drops, while 200-400 sizes cover smaller branches. Set the downstream pressure anywhere in the 0.05-0.9 MPa (7-130 psi) range; if your circuit never exceeds 0.4 MPa, the low-pressure (L) variant of the GR is available. Pick the gauge scale you read on site - MPa, psi or bar - and the thread your piping uses: PT is the catalogue standard, with G (BSPP) and NPT as order options. Bracket (blank) or no bracket (J) is a mounting choice, and a reverse/check valve (K) can be specified if the circuit needs one.
Flow for this regulator is published as curves, not a single rating, so send us your air demand and supply conditions and we will confirm sizing against the datasheet before you order.
Quick checklist
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC publishes regulator flow as curves rather than a single rated figure, so we do not quote one number. Tell us your supply pressure, set pressure and air demand, and we will confirm the sizing from the datasheet on request.
The F2 in the code specifies the embedded square gauge scaled in psi, and the J specifies no mounting bracket - the GR body can still be panel-mounted. Other gauge scales (MPa or bar), a round external gauge, bracket mounting and a reverse/check valve are all available as order options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.