The AirTAC HLQ25X30-S AirTAC Ball-Bearing Slide Table Cylinder Bore 25 is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
The AirTAC HLQ25X30-S slide-table cylinder pairs a double-acting dual-rod air cylinder with a ball-bearing guide for straight, low-deflection travel. Bore 25 mm with a 30 mm stroke gives a compact guided slide with higher thrust from the dual-rod design. The floating joint isolates the rod from side torque, and the HLQ ball-bearing guide adds anti-rust, dust-proof performance for harsh or clean environments.
This genuine AirTAC part ships with a standard magnet for position detection via CMSH, DMSH, or EMSH switches mounted in the body slots. We verify thrust, dimensions, and load and moment ratings from the published datasheet and on-page spec table on request.
| Model | HLQ25X30-S AirTAC Ball-Bearing Slide Table Cylinder Bore 25 |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
Bore 25 mm offers higher thrust in the HLQ ball-bearing range, and the 30 mm stroke suits short-transfer or gripper-traverse tasks. Pick the HLQ ball-bearing guide for anti-rust, dust-proof operation over HLS cross-roller when precision is adequate. Adjuster options include basic bumpers or adjustable rubber stoppers and shock absorbers; thread options are PT, G, or NPT.
We confirm allowable load, moment, and deflection from the published datasheet tables and curves for this exact bore and stroke.
30 mm guided stroke moves parts between pick and place positions with ball-bearing anti-rust precision.
Dual-rod slide transfers parts onto a conveyor with 30 mm straight travel and low deflection.
Bore 25 guided slide positions an assembly tool or fixture over a short 30 mm path in wash-down areas.
HLQ has a ball-bearing guide with anti-rust and dust-proof properties. HLS uses cross-rollers for maximum rigidity and precision. HLH uses a miniature roller-ball integrated guide with best straightness and three port groups. HLF is a low-height cross-roller design. Pick HLQ when corrosion resistance and dust-proofing matter most.
Allowable load, moment, and deflection are published as bore- and stroke-specific tables and curves in the datasheet. We confirm these values for your exact model on request rather than estimating, since they vary by stroke and mounting orientation.